MED070926CSENG- -  -  N- SITAL A60 F.R.C.D. -N- S- S- -19/03/2026- Marine Equipment- - SN- S- - N-  - 62,219B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED070926CS- N-Mar 18, 203162219
 
Form
  Marine Equipment(TO)
Certification N. MED070926CS - (ENG)
Certificate date 19/03/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
SITAL A60 F.R.C.D.
Applicant SITAL S.R.L.
Place of requester VIA DELL' ARTIGIANATO, 1  %  29028 Ponte Dell'Olio (PC)  % ITALY
Tel. N.,Fax, Email 0523 878421, 0523 875141, alex.bossalini@sital.it
Directive (EU) 2025/1533
Standards IMO MSC.1/Circ.1435,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/3.2,SOLAS 74 Reg. II-2/9,IMO MSC/Circ. 1120,IMO Circ. MSC.1 1434,IMO Circ. MSC.1 1616,IMO Circ. MSC.1 1621
Request 29/01/2026
Expire date 18/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED070926CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type SITAL A60 F.R.C.D.
Applicant SITAL S.R.L.
VIA DELL' ARTIGIANATO, 1,29028 Ponte Dell'Olio (PC),ITALY
Testing standards IMO MSC.1/Circ.1435,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/3.2; SOLAS 74 Reg. II-2/9; IMO MSC/Circ. 1120; IMO Circ. MSC.1 1434; IMO Circ. MSC.1 1616; IMO Circ. MSC.1 1621
Issued in Genoa on
This Certificate is valid until
March 19, 2026
March 18, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED070926CS
Page 1 of 2

Product description

Deck composed of two carbon steel panels having maximum width of 1593x3000 mm; the joint between the two panels is achieved by means of two carbon steel profiles shaped as per drawing, having thickness 4 mm, welded to the panels themselves and held together between them by a carbon steel plate with dimensions of 247x120x15 mm screwed, through 4 M10 stainless steel screws and 4 D10 stainless steel washers, to a carbon steel plate with dimensions 120x120 mm welded to the panel; each panel is composed of two corrugated sheets welded together, having maximum width of 1050 mm. The sheet having thickness of 2 mm, presents a corrugation with smaller base width of 120 mm, height of 39.6 mm and angle with respect to the larger base of 36° with pitch of 350 mm.
The insulation of the sheet is composed of three layers of mineral wool Rockwool type SeaRox SL620 with density of 100 kg/m
3 and thickness of 40 mm each; having dimensions 600x1200 mm positioned vertically with the first layer offset with respect to the following one by 300 to 600 mm.
On the external side of the insulation, for fixing it to the deck, a perforated carbon steel sheet with thickness of 1.5 mm is provided, with holes having diameter equal to 4 mm and alternated at 60° empty/solid 40%; fixed through: M6 stainless steel threaded rods welded to the sheet, one graphite washer, one stainless steel washer and one stainless steel cap nut M6, having pitch of 300x300 mm.
Between the two panels two intumescent seals Promat type Promaseal-PL-SK/G having dimension 50x1.8 mm are provided, one on each shaped profile; on the coupling between the two aforementioned profiles, on the side not exposed to fire there is a mineral fiber gasket Bifire type paperseal ECO having width of 20 mm.
On the joint between the panels, on the non-exposed side, a protection cover is provided composed of a perforated carbon steel sheet having thickness 1.5 mm with holes having diameter equal to 4 mm and alternated at 60° empty/solid 40%, and dimensions of 89x270x35 mm, insulated with two layers of mineral wool Rockwool type SeaRox SL620 with density of 100 kg/m
3 and thickness of 40 mm each, positioned vertically with the first layer offset with respect to the following one by 300 to 600 mm; and fixed with M6 stainless steel screws and washers having pitch equal to 300 mm, to the sheet containing the insulation of the panels constituting the deck.
Field of application
Fire resistant A-60 Class lightweight deck.
The certificate item is not in compliance with the requirement of Fire Test Procedure Code Part 3 regarding:
- the thickness of the bulkhead
- corrugated plate without stiffeners
These characteristics must be taken into account.
Reference documents
Sital drawings No. 8049-55-5480-ST-DWG-001 Rev. 00 dated 04/03/2026 enclosed to Test Report No. 2026CS01709 issued on 19/03/2026.
Tests carried out
Tests as per Rina laboratory test report No. 2026CS01709 issued on 19/03/2026 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED070926CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****