ELE086025CSENGD- -  -  N- Total command -N- S- S- -08/04/2026- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 344,171Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE086025CS- N-Apr 8, 2031344171
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE086025CS - (ENG)
Certificate date 08/04/2026
Type Impianti Elettrici
Product Sistema di controllo di propulsione remoto

Model or Denomin.
Items
Total command
TOTAL COMMAND
Applicant ZF PADOVA S.R.L.
Place of requester VIA PENGHE 48  %  35030 Caselle Di Selvazzano (PD)  % ITALY
Tel. N.,Fax, Email 0498299311, 0498299570, giovanni.consoli@zf.com
Standards RINA Rules for the Classification of Ships - Part C- Machinery, Systems and Fire Protection - Ch.3 , Sect. 8, Table 1
Expire date 08/04/2031
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE086025CS
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Propulsion remote control system
Type Total command
TOTAL COMMAND
Applicant ZF PADOVA S.R.L.
VIA PENGHE 48
35030 Caselle Di Selvazzano (PD)
ITALY
Reference standards RINA Rules for the Classification of Ships - Part C- Machinery, Systems and Fire Protection - Ch.3 , Sect. 8, Table 1
  

 
 
   .   This Certificate is valid until April 8, 2031
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE086025CS
Enclosure - Page 1 of 2
Total command
The TotalCommand is a propulsion control, it can also provide telematics data (temperature, pressure and output speed) via embedded sensors in ZF trasmissions.
The system utilizes plug-in connectors that reduces the installation time. The system is fullt configurable from the bridge It can automatically mantains the same speed on multiple engines, the synchronization allows (for one lever operation) the control of multiple engines and trasmissions with a single lever.
There can be up to 6 control station on a vessel

The system is composed by:
  • ZF JMS: it is the joystick system that provides the helmsman with simple and intuitive vessel control. It is available in basic configuration (without atomatic heading control) or in premium configuration (the integrated electronic compass mantains the desired vessel heading). IP67
  • Control levers: IP67, dimmerable LEDs, combined and indipendent trim control, calibration and diagnostic data
  • 5" Display: hi-resolution 5-inch projected capacitive touch scree, full sunlight view, IP67
  • Processor/ECU: IP67+IP69K; -40°C/120°C operating temperature; 9-32V operating voltage range
  • Analog interfaces: CAN-bus device providing putput for analog controled engines; fully sealed IP67; extended power supply 9-31V; provided with votlage, current, power and frequency output
  • Actuators: electromechanical push-pull actuator for gear engage and throttle command; IP67; extended power supply 9-31V
  • Display unit: is provided with touch screen. The IP shall be at least IP67

Product's codes:
  • Total command HMI 3341.011.XXX (joystick) e 3341.012.XXX (lever)
  • CAN to analog converter dual 3340.008.049; CAN-2-analog interface 3340.008.048
  • CAN to mechanical actuator 3340.008.053
  • Control platform system 6073.304.019
  • ZF ESGI-control device 3340.309.001
  • Joystick 3341.011.xxx
  • Lever 3341.012.xxx
  • Helm-unit
  • Inverter - electric motor

Test reports:
For TotalCommand HMI
  • TR 2021-0436-00
  • TR 2021-0414-00
  • TR 2022-0119-00
  • TR 2021-0137-00
  • TR 2025-0142-00
  • TR 2025-0144-00
  • TR 2025-0236-00
  • TR 2025-0238-00
  • TR 2023-0450-00
  • TR 2023-0451-00

For CAN Analog converter and interface
  • TR 2021-0688-00
  • TR 2022-0179-00
  • TR-2022-0180-00
  • TR 2025-0143-00
  • TR 2025-0237-00
  • TR 2023-0452-00
  • TR 2023-0510-00
  • TR 2023-0511-00

For CAN to mechanical actuator;
  • TR 2023-0462-00
  • TR 2023-0429-00
  • TR 2023-0190-00 (with vibration test done in TR 2025-0145-00)
  • TR-2023-0429-00
  • TR 2025-0239-00
  • TR 2023-0462-00




TYPE APPROVAL CERTIFICATE
No. ELE086025CS
Enclosure - Page 2 of 2
Total Command


Control platform system and ZF ESGI-Control device:
  • TR 2020-0336-00
  • TR 2024-0437-00
  • TR 2025-0146-00 and 0147-00
  • TR 2025-0240-00
  • TR 2023-0449-00

Groups of components:
  • TR 2025-0229-00
  • TR 2025-0230-00
  • TR 2023-0453-00

Display unit:
  • 25A266F


Helm unit;
  • 797SKF-25-TR-001 rev.1


Inverter-electric motor:
  • ENV-V200220015861B-000
  • ENV V200220015861A-000
  • ELS-V200220015861A-000
  • EMC-V200220015861A-000
  • 2026/00113

Additional documents:
  • Quality audit for Intek 2025/CS/01/4419

Genoa April 8, 2026
**** NOTICE: This is NOT an official certificate ****