MED167225CSENGB- -  -  N- MIRAMAR -N- S- S- -04/04/2025- Marine Equipment- - SN- S- - N-  - 55,722B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED167225CS- N-Apr 3, 203055722
 
Form
  Marine Equipment(TO)
MED167225CS
Certification N. MED167225CS - (ENG)
Certificate date 04/04/2025
Type Mezzi di salvataggio
Product Cinture di salvataggio
Item Nº MED/1.4

Model or Denomin.
Items
MIRAMAR
Applicant ATLANTIS S.R.L.
Place of requester ZONA INDUSTRIALE SN  %  89056 Santa Cristina D'Aspromonte (RC)  % ITALY
Tel. N.,Fax, Email +39 0966 878809, +39 0966 878809, info@atlantisitalia.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7 , SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1470.
Request 04/03/2025
Expire date 03/04/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED167225CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/1.4
Description Life jackets
Type MIRAMAR
Applicant ATLANTIS S.R.L.
ZONA INDUSTRIALE SN,89056 Santa Cristina D'Aspromonte (RC),ITALY
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7 , SOLAS 74 Reg. III/22, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) II, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1470.
Issued in Genoa on
This Certificate is valid until
April 4, 2025
April 3, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED167225CS
Page 1 of 2

Main characteristics
Inflatable lifejacket for adult, "MIRAMAR" with the following main components:

Components
Type
Manufacturer
Inflatable chamber material TPU 1001 P YELLOW Erez Thermoplastic
Inflation system Automatic/manual device:
PRO SENSOR

United Moulders Limited
Oral inflation device:
100mm UMS 1654 and 150mm UMS1653

United Moulders Limited
CO2 gas cylinder 33 gr I.S.I. Component
Tapes 40mm 3510 / 30mm 3514 / 25 mm 3163 Eurotex
Fasteners Stealth 20/Stealth 30
SS 40
National Molding Europe
Stitches ATLASE ATLANTIS
Whistle DURAFLEX National Molding Europe

Reference documents
Miramar Adult Drawings booklet Art 30016 issued by Atlantis Srl and approved by RINA with n° CSST 5713;
Miramar Adult Materials and components Booklet issued bt Atlantis Srl and filed by RINA with n° CSST 5718;
Miramar Adult Marking Detail Art 30016 issued by Atlantis Srl and approved by RINA with n° CSST 5714;
Miramar Adult Material Datasheet for "Reference Test Device" ATL 0110/A issued by Atlantis Srl and filed
by RINA with n° CSST 4414.
Tests carried out
Water performance test n° 2010ME01315 issued by RINA and filed by RINA with n° CSST 5716 in
compliance with Res. MSC. 81(70) as amended by MSC.200(80) and related annex filed by RINA with
no. CSST 5717; Laboratory test on lifejacket issued by RINA Laboratory on 10/06/2010 and filed by RINA
with n° CSST 5715; Adult RTD buoyancy tracking and verification, report n° 2014CS013602/RSA, issued
and filed by RINA with n° CSST 12222; Additional test report n° 2015ME74301 witnessed and issued by
RINA Messina Office according to MSC 378(93) and filed by RINA with n° CSST 13388.
Application/Limitation of use
The lifejacket is approved for use only by adult of weight more than 43 kg and height more than 155 cm.
The lifejacket may be equipped with extension belt designed by ATLANTIS S.R.L. to fit persons weighing
up to 140 Kg and with a chest girth of up to 1.750 mm.

The lifejacket is to be equipped with position indicating lights EC type Approved in compliance with Directive
2014/90/EU as amended.
The lifejacket is to be equipped with retro-reflective material EC type Approved in compliance with Directive
2014/90/EU as amended.




ATTACHMENT TO
CERTIFICATE No. MED167225CS
Pages 2 of 2

This certificate annuls and replaces the certificate No. MED058521CS dated 03/10/2021 due to renewal.

The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****