Window composed of three or more panes having, each, maximum clear size of 678 mm in width and 1494 mm in height. The glass compound is composed of two toughened glasses (manufacturer Veneto Vetro) having, each, thickness of 12 mm and, in between, a PVB layer having thickness of 0.76 mm. The central mullions are composed of steel profiles having depth of 65 mm and thickness of 14 mm; the frame is composed of a steel profile having depth of 120 mm and thickness of 12 mm. The glass retaining frames, fitted on the side exposed to the fire, are composed of steel plates having thickness of 5 mm and width of 35 and 50 mm fixed to the mullions and to the frame by means of M6 screws (pitch of 50 mm). Between the glass faces, the frame and the glass retaining frames, ceramics gaskets (manufacturer Frenzelit), having thickness of 2 mm, are fitted. On the lower side, between the glass edge and the frame, spacers of calcium silicate type PROMATECT H (manufacturer Promat), are fitted. The glass panes are sealed by means of silicone type FIRESTOP 700.
The window may also be produced by Naval Suppliers Srl - Zona Industriale 24 - 33049 San Pietro al Natisone (UD) - Italy.
Field of application Fire resistant A-0 Class window with fire hazard in the inner side of the application.
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents HET ANKER BV drawing No. FTW-A0-SQ3-2216-1012 dated 24 June 2014 approved on 27 June 2014 with endorsement No. LABS-926.
Tests carried out Tests as per RINA Test Laboratory Laboratory report No. 2014CS01991/1 issued on 27 June 2014 according to IMO 2010 FTP Code Part. 3 Appendix 2 - A.I - Windows. |