ENGGS03/08/2009
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED116609SH/002
Certificate date 8/3/09
Type Mezzi di salvataggio
Directive 2002/75/EC
Product Dispositivi per la messa a mare dotati di paranchi e verricelli
Item Nº A.1/1.21
Model FH65
Identification 0938029
Manufacturer ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Place of production BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Place of requester BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG  % CHINA
Tel. N.,Fax, Email +86 576 85073188, ---, ---
Standards MSC.81(70) and Res MSC.48(66) LSA Code
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED116609SH/002

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21
Description Launching appliances using fall and winch (davits)
Model FH65
Identification 0938029
Applicant ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code
    
Issued at Genoa 
on August 3, 2009

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /09
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED116609SH/002
Manufacturer:
ZHEJIANG HENGXIN SHIP EQUIPMENTS CO., LTD.
Address
BEI YANGI NDUSTRIAL ZONE,SHANG PAN TOWN,LINHA ZHEJIANG
CHINA

Verified components of the equipment (with serial number)
0938029
Technical documentation
Test report issued by RINA on October 27, 2008 ( n. 0938029 in accordance with Resolution MSC. 81(70) and MSC.48(66) LSA Code.

Drawing as followings:
 STRT-5533                      65KN launching davit of Free-Fall lifeboat

Product description:
Lenght of ramp: 7.200 meters.
Safety working Laoad: 65 kn.
Angle of ramp: 35 deg

                                                 ATTACHMENT TO
                                    CERTIFICATE No. MED116409SH/002

Capacity of drum: 50 meter
Steel wire diameter: 18 x 19+FC, 20mm.
Hydraulic system working pressure: 18.0 Mpa
Winch braking test load: 97.5kn
Recovery test load: 42kn
Dynamic test load: 71.5kn
Static test load: 143kn
Minimum launching load: 36kn
Hoisting speed: ≥3m/min

Limitation on the acceptance or use of the product
Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****