FAB029724MIENG- -  -  N- Austenitic,O.D. from 6 to 120 mm,W.Thk from 0.75 to 4 mm -N- S- S- -25/03/2024- Fabbricanti Approvati- - NN- N- Michele Fusco- S-  - 158,740Michele FuscoBbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB029724MI- N-Mar 23, 2029158740
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB029724MI - (ENG)
Certificate date 25/03/2024
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio saldati in acciaio inossidabile

Model or Denomin.
Items
Austenitic,O.D. from 6 to 120 mm,W.Thk from 0.75 to 4 mm
Applicant ILTA INOX S.P.A.
Place of requester STRADA STATALE 45 BIS  %  26010 Robecco D'Oglio (CR)  % ITALY
Tel. N.,Fax, Email 0372-9801, 0372 980262, QUALITY.ILTA@ARVEDI.IT
Standards RINA Rules for the approval of manufacturers of materials
Expire date 23/03/2029
Responsible Office RINA Milan Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB029724MI
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Welded stainless steel pipes and tubes
Type Austenitic
O.D. from 6 to 120 mm
W.Thk from 0.75 to 4 mm

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until March 23, 2029
_________________________________
RINA Services S.p.A.
Michele Fusco
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB029724MI
Enclosure - Page 1 of 1
O.D. from 16 to 120 mm,W.Thk from 0.75 to 4 mm

APPROVAL CONDITIONS




Steel Types:
(Stainless Steel) ASTM A312 Tp 316L - ASTM A249 Tp 316L - EN10217 Part 7 1.4404.


Product Making Process:
Laser Equipment according to Manuf'r Proc.N. GQ 751.02 in force.


Heat Treatment Condition:
Bright Annealing Solution (1050 - 1100 ° C).


NDE on Welded Seam:
Eddy Current in lieu of Hydraulic Test according to Manuf'r Proc.N. GQ 824.03 in force.


Survey Conditions:
the subject material to be in compliance, in all respects, with the requirements specified in RINA Rules
Part D Ch.2 Sect.2 and shall be tested accordingly.






General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Milan Marine March 25, 2024
**** NOTICE: This is NOT an official certificate ****