MED369126CS!003ENGD- -  -  N- FLOOR MB - DEM-05 -N- S- S- -13/07/2026- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED369126CS/003- N-Jul 12, 2031254401
 
Form
  Marine Equipment(TO)
Certification N. MED369126CS/003 - (ENG)
Certificate date 13/07/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.110

Model or Denomin.
Items
FLOOR MB - DEM-05
Applicant DE WAVE SRL
Place of requester VIA DE MARINI 1  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email 01064020886; davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,IMO Circ. MSC 1120,SOLAS 74 Reg. II-2/9,IMO MSC.1/Circ. 1581
Request 03/06/2026
Expire date 12/07/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED369126CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.110
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type FLOOR MB - DEM-05
Applicant DE WAVE SRL
VIA DE MARINI 1,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; IMO Circ. MSC 1120; SOLAS 74 Reg. II-2/9; IMO MSC.1/Circ. 1581
Issued in Genoa on
This Certificate is valid until
July 13, 2026
July 12, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED369126CS/003
Page 1 of 2

Product description

Deck, having dimensions of 2500 x 2720 mm whose metal structure is composed, moving from the side exposed to the fire, of a grid built with tubolar profiles 30x30x2 having pitch of 420 and, normal to them, punched strips having thickness of 2 mm width 80 mm and pitch 550 mm, and rods with diameter of 5 mm and pitch variable from 345 to 450 mm, are fitted. On such structure a layer of mineral wool, having density 150 kg/m3 and thickness 30 mm, is fitted and secured by means of steel hooks, 40 mm diameter washers and a wire net. The deck is equipped with two stainless steel discharge units with the relevant pipes.
The door may be manufactured also by De Wave Polska Sp.z o.o. Manufacturing Unit ul. Spoldzielcza 4, 87-600 Lipno, Poland.
Field of application
Fire resisting B-0 Class deck.
Reference documents
De Wave drawing No. B-16/H0/02 dated 14 May 2021 approved on 14 July 2021 with endorsement No. LABS-2249.
Tests carried out
Tests as per RINA Test Laboratory Reports No. 2021CS012617/1 issued on 14 July 2021 according to IMO 2010 FTP Code.




ATTACHMENT TO
CERTIFICATE No. MED369126CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****