MED471225CS!003ENGD- -  -  N- SISTEMA PANNELLO PARETE SOFFITTO CLASSE C PPSC CON ACCESSORI,PANEL SYSTEM "C" CLASS TYPE PPSC - WALL AND CEILING PANEL WITH ACCESSORIES -N- S- S- -02/03/2026- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED471225CS/003- N-Mar 1, 2031254401
 
Form
  Marine Equipment(TO)
Certification N. MED471225CS/003 - (ENG)
Certificate date 02/03/2026
Type Protezione antincendio
Product 'C' Class divisions
Item Nº MED/3.64
USCG Category N° 164.109

Model or Denomin.
Items
SISTEMA PANNELLO PARETE SOFFITTO CLASSE C PPSC CON ACCESSORI,PANEL SYSTEM "C" CLASS TYPE PPSC - WALL AND CEILING PANEL WITH ACCESSORIES
Applicant DE WAVE S.R.L.
Place of requester VIA DE MARINI 60  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/3.10,SOLAS 74 Reg.II-2/3.33,SOLAS 74 Reg. II-2/9,IMO MSC/Circ. 1120
Request 17/10/2025
Expire date 01/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED471225CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.64
USCG Category Nº 164.109
Description 'C' Class divisions
Type SISTEMA PANNELLO PARETE SOFFITTO CLASSE C PPSC CON ACCESSORI
Applicant DE WAVE S.R.L.
VIA DE MARINI 60,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/3.10; SOLAS 74 Reg.II-2/3.33; SOLAS 74 Reg. II-2/9; IMO MSC/Circ. 1120
Issued in Genoa on
This Certificate is valid until
March 2, 2026
March 1, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED471225CS/003
Page 1 of 2

Product description



Panel system composed by wall panels and ceiling panels having width ranging from 200 mm up to 1000 mm and height ranging from1000 mm up to 2500 mm. The panels are composed by 1 reinforced corrugated galvanized steel sheet thickness 0.5 mm glued to a stainless steel sheet panel thickness 0.8 mm by means of 100 g/m2 of adhesive type MADIPUR MK or, as an alternative, by means of 150 g/m2 of adhesive type KEDIFIX MSP 71/C. The reinforced corrugated steel sheets have a corrugation dimensions 29x25x29 mm with a pitch ranging from198 mm up to 396 mm for the wall panels and a pitch ranging from 198 mm up to 396 mm for the ceiling panels. The bottom of the wall panels is overlapped to a stainless steel coaming with dimensions 205 mm x 31 mm (HxW) and thickness of 2.5 mm; at mid height of the panel is provided a “C” shaped reinforcement steel profile with dimensions 80x30 mm and thickness of 1.5 mm; in the joint between the wall panels and the ceiling panels are provided 2 “Z” shaped steel profile, 1 vertical for the wall panels and 1 horizontal for the ceiling panels, with dimension of 30x80x30 mm and thickness of 1.5 mm. The panel joints consist of “L” shaped sheet bent edges, locking by means of a further shaped profile and fixing by means of steel tapping screws 4.2x13 mm on one vertical edge as follows. For the wall panel is provided 1 screw fitted to the “C” shaped profile and 1 screw fitted to the “Z” profile. For the ceiling panel is provided 1 screw fitted to the “Z” profile on each short edge . The junction between the wall and ceiling panels consist of a rounded stainless steel finishing profile spot welded. The coaming, the “C” and “L” profiles are spot welded to squared steel pipe with dimensions 20x20 mm and thickness of 1.5 mm and fixed to the bulkhead and to the deck. On the wall panel may be fitted an hatch composed of a stainless steel sheet thickness 0.8 mm, having width ranging from 200 mm up to 800 mm and height ranging from 200 mm up to 1800 mm and a frame composed by a stainless steel “Z” shaped profile with dimensions 31x30x15 mm thickness 0.8 mm, having width ranging from 262 mm up to 862 mm and height ranging from 262 mm up to 1862 mm. The hatch is provided of a stainless steel rod hinge diameter 4.2 mm and a stainless steel cam lock with square key.
The door may be manufactured also by:
  1. Wingeco s.r.l. - Via Geirato 150R/152R 16138 Genova - Italy
  2. Inoxking - Via Cal Longa 22, Vazzola (TV) - Italy
Field of application

C Class division providing that all used materials are non combustible.
Reference documents

Precetti drawing No. PR201-PPSC, Rev. 01 dated 24 February 2021, approved on 02 March 2021 with endorsement No. LABS-2187.




ATTACHMENT TO
CERTIFICATE No. MED471225CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****