MED449822CSENGD- -  -  N- PUROSTIK FL 325 RAPID -N- S- S- -15/11/2022- Marine Equipment- - SN- S- - N-  - 529,980B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED449822CS- N-Nov 14, 2027529980
 
Form
  Marine Equipment(TO)
Certification N. MED449822CS - (ENG)
Certificate date 15/11/2022
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (e) adhesives used in the construction of 'A', 'B' & 'C' class divisions
Item Nº MED/3.18e

Model or Denomin.
Items
PUROSTIK FL 325 RAPID
Applicant COLLANTI CONCORDE SRL
Place of requester VIA SCHIAPARELLI 12 Z.I.  %  31029 Vittorio Veneto (TV)  % ITALY
Tel. N.,Fax, Email 0438 912121, 0438 901822, INFO@COLLANTICONCORDE.IT
Directive (EU) 2022/1157
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 11/11/2022
Expire date 14/11/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED449822CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/3.18e
Description Surface materials and floor coverings with low flame-spread characteristics: (e) adhesives used in the construction of 'A', 'B' & 'C' class divisions
Type PUROSTIK FL 325 RAPID
Applicant COLLANTI CONCORDE SRL
VIA SCHIAPARELLI 12 Z.I.,31029 Vittorio Veneto (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
November 15, 2022
November 14, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED449822CS
Page 1 of 2

Product description

One-component polyurethane adhesive

Mass per area (g/m2) 80 ± 10 %

Thickness (mm) 0.075 ± 10 %
Field of application

As adhesive.
As finishing material for all exposed interior and concealed or inaccessible surfaces.

When used as finishing material, the product may be applied to any non-combustible support having a thickness equal to or greater than 25 mm and a density ³ 712,5 kg/m3. When intended for decks the product may be applied to any metallic support, any non combustible support and any material having low flame spread characteristics.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.

Tests carried out

Tests as per RINA Test Laboratory Report No. 2022CS014498/1 and No. 2022CS014498/2 dated 15 November 2022 issued according to:
  • IMO 2010 FTP Code Part 5
  • ISO 1716: 2010




ATTACHMENT TO
CERTIFICATE No. MED449822CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****