MED244626CSENGD- -  -  N- SP 50 SEMTEX -N- S- S- -05/05/2026- Marine Equipment- - SN- S- - N-  - 742,049B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED244626CS- N-May 4, 2031742049
 
Form
  Marine Equipment(TO)
Certification N. MED244626CS - (ENG)
Certificate date 05/05/2026
Type Protezione antincendio
Product Sottofondo di copertura del ponte di coperta
Item Nº MED/3.1
USCG Category N° 164.106

Model
Items/Sizes
SP 50 SEMTEX
Applicant SIRN S.R.L.
Place of requester VIA CASAREGIS 22/1  %  16129 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 586771, 010 542678, genova@sirn.it
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/4, SOLAS 74 Reg.II-2/6, SOLAS 74 Reg.X/3, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7
Request 07/04/2026
Validity 04/05/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED244626CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.1
USCG Category Nº 164.106
Description Primary decks covering
Type SP 50 SEMTEX
Applicant SIRN S.R.L.
VIA CASAREGIS 22/1,16129 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/4, SOLAS 74 Reg.II-2/6, SOLAS 74 Reg.X/3, IMO Res.MSC.36(63)-(1994 HSC Code) 7, IMO Res.MSC.97(73)-(2000 HSC Code) 7
Issued in Genoa on
This Certificate is valid until
May 5, 2026
May 4, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED244626CS
Page 1 of 2

Product description


Mixture composed of cement dust,aggregate, polystyrene and binders (gray color).

  • Thickness range (mm): from 10 to 20 ± 10 %
  • Mass per area range (kg/m2): from 6 to 12 ± 10 %

Field of application

As primary decks covering.

The product may be applied to any metallic support, any non-combustible support and any material having low flame spread characteristics.

On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.

Tests carried out


Tests as per RINA Test Laboratory Reports No. 2026CS012446/1 and 2026CS012446/2 dated 4 May 2026 issued according to:
  • IMO 2010 FTP Code Part 5.




ATTACHMENT TO
CERTIFICATE No. MED244626CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****