Glazed single leaf hinged door. The leaf has maximum dimensions of 762x1869 mm (WxH) and maximum clear opening of 702x1809 mm (WxH). The glass pane, having maximum clear opening size of 582x1689 mm, is composed, moving from the unexposed side, of a toughened glass type FLOAT CHIARO (manufacturer Vetrotech) having thickness of 6 mm, a SGP layer, 1.52 mm thick, a toughened glass having thickness of 6 mm, a void space 6 mm deep and a glass type CONTRAFLAM MARINE A60 (manufacturer Vetrotech) having thickness of 27 mm. The frames of the door and of the glass, are composed of hollow stainless steel profiles having thickness of 1.5 mm type Forster mm bolted by means of M10 screws, on the side not exposed to the fire, to a steel flat having dimensions of 60x8 mm (lower side) and to L shaped carbon steel profiles having dimensions of 60x40x7 mm (other sides). On the upper side, between the frame and the L shaped profile, a C shaped steel profile, having dimensions of 47x50x4, is fitted and bolted on both sides by means of M10 screws. The glass retaining frame, fitted on the exposed side, is composed of a stainless steel flat, 4 mm thick and having width of 54 mm fixed to the frame by means of M4 screws and fitted, on the lateral, with flats having height of 10 mm, length of 50 mm and thickness of 4 mm; this flat is covered by means of an U shaped stainless steel carter, 1.5 mm thick and having dimensions of 58x27 mm, fixed by means of screws to the lateral flats and insulated, inside (also the space between glass retaining frame and frame), with product named MET-Ca-Si (density of 950 kg/m3 and thickness of 12 mm). The door frame is covered by means of a stainless steel carter, having thikness of 1.5 mm and dimensions of 75x85 mm catched to steel clips, 1.5 mm thick (welded to the door frame) and, with screws, to two L shaped stainless steel profiles, having thickness of 2 mm and dimensions of 20x30 mm, bolted together and welded to the bulkhead. The carter is insulated, inside, by means of ceramic fiber type FireMaster Marine Plus Blanket having density of 70 kg/m3. The leaf is fitted with a closing devices that act on three points actuated by the handle. Between the glass faces, the frame and the glass retaining frame and between the glass edges and the frame, gaskets of Kerafix Flexlit type, 5 mm thick, are fitted. Between the glass edges and the frame, 4 spacers of calcium silicate type Promatect H (density of 870 kg/m3), are fitted. The door is fitted, on the exposed side, with external active door closer.
|
ATTACHMENT TO
CERTIFICATE Nr. MED511525CS/031
Page 2 of 3 |
Field of application
Fire resistant A-0 single leaf hinged door with fire hazard in the side opposite to the opening and fitted with the glass type CONTRAFLAM MARINE A60. Door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
METALSIGMS TUNESI drawing No. T-002 Rev. C dated 7 November 2018 approved on 14 November 2018 with endorsement No. LABS-1764.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2018CS013445 issued on 14 November 2018 according to IMO 2010 FTP Code Part 3 and to IMO MSC.1/Circ. 1319 dated 11 June 2009. |