MED225322CSENGD- -  -  N- NAVIFLEX® -N- S- S- -22/06/2022- Marine Equipment- - SN- S- - N-  - 306,166B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED225322CS- N-Jun 21, 2027306166
 
Form
  Marine Equipment(TO)
Certification N. MED225322CS - (ENG)
Certificate date 22/06/2022
Type Protezione antincendio
Product Sottofondo di copertura del ponte di coperta
Item Nº MED/3.1
USCG Category N° 164.106

Model
Items/Sizes
NAVIFLEX®
Applicant ITALKEM SRL Unipersonale
Place of requester VIALE ALBERT EINSTEIN, 5  %  15053 Castelnuovo Scrivia (AL)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2021/1158
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 25/5/2022
Validity 21/06/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED225322CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.1
USCG Category Nº 164.106
Description Primary decks covering
Type NAVIFLEX®
Applicant ITALKEM SRL Unipersonale
VIALE ALBERT EINSTEIN, 5,15053 Castelnuovo Scrivia (AL),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
June 22, 2022
June 21, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED225322CS
Page 1 of 2

Product description



Two-component polyurethane resin added with granular inert fillers (expanded clay or sand quartz) for use as a substrate.

Weight ratio (resin : inert) up to 1:1
Thickness (mm) up to 20 +/-10%

Field of application

As primary deck covering.
As floor covering.
The product may be applied to any metallic support, any non-combustible support or any product having low flame spread characteristics.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 of IMO 2010 FTP Code.

Tests carried out

Tests as per RINA Test Laboratory reports No. 2017CS011536/1 issued on 26 June 2017 according to IMO 2010 FTP Code Part 5.




ATTACHMENT TO
CERTIFICATE No. MED225322CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****