MED071325CS!004ENG- -  -  N- B-15 CEILING PANEL -N- S- S- -31/03/2025- Marine Equipment- - SN- S- - N-  - 1,083,701B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED071325CS/004- N-Mar 30, 20301083701
 
Form
  Marine Equipment(TO)
Certification N. MED071325CS/004 - (ENG)
Certificate date 31/03/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.110

Model or Denomin.
Items
B-15 CEILING PANEL
Applicant MERCAN PANEL URETIM SAN. VE TIC. A.S.
Place of requester ÇERKESLI OSB MAH., IMES BULVARI, No.11 DILOVASI, KOCAELI Kocaeli  % TÜRKIYE
Tel. N.,Fax, Email +90 262 502 0180, +90 262 502 0182, yasinyamac@mercanpanel.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO Circ. MSC 1120,IMO Circ. MSC.1 1581
Request 10/02/2025
Expire date 30/03/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED071325CS/004

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.11b
USCG Category Nº 164.110
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type B-15 CEILING PANEL
Applicant MERCAN PANEL URETIM SAN. VE TIC. A.S.
ÇERKESLI OSB MAH., IMES BULVARI, No.11 DILOVASI, KOCAELI Kocaeli,TÜRKIYE
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO Circ. MSC 1120; IMO Circ. MSC.1 1581
Issued in Genoa on
This Certificate is valid until
March 31, 2025
March 30, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED071325CS/004
Page 1 of 2

Product description



Ceiling composed of panels having maximum width of 500 mm, installed at 300 mm from the deck. The panels are composed, moving from the exposed side, by a steel sheet, 0.6 mm thick glued by Sika force 7710L100 with 200g/m2 to a layer of mineral wool type Izocam Marine Firebatts 140 having thickness 50 mm and density of 140 kg/m3. The joints between ceiling panels are carried out by their "Z" shaped edge, between the two panel edges is provided a layer of intumescent material type Kerafix 2000 having a width of 20 mm and thickness of 5 mm. The ceiling panels are supported by an ā€œLā€ shaped steel profile 60x60x3 mm fitted to the bulkhead by steel screws having diameter of 4 mm and pitch of maximum 500 mm; the panels are fixed to the "L" shaped profile by steel rivet having diameter of 4 mm and pitch of 500 mm. The transversal joint between the panels is carried out by a continuos "T" shaped steel profile having dimension of 120x60x3 mm. The transversal joint is welded to the deck by suspension system carried out by steel strips having dimension of 5x50 mm and length of 250 mm with a pitch of 400 mm.


Field of application

Fire resistant B-15 Class ceiling with fire hazard on side fitted with the steel sheets having thickness of 0.6 mm.


Reference documents

Mercan Panel drawing No. MRN-CP-C3 rev. 0 dated 10/01/2019 enclosed on Test Report N. RFTR18119-REV1 issued on 26/03/2025; Mercan Panel drawing No. MRN-CP-C3 rev. 0 dated 10/01/2019 identify by N. 2025CS01713/4 attachment No. 1.


Tests carried out

Tests as per Efectis Test Laboratory report No. RFTR18119-REV1 issued on 26/03/2025 according to IMO 2010 FTP Code.




ATTACHMENT TO
CERTIFICATE No. MED071325CS/004
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****