MED471225CS!005ENGD- -  -  N- DECK PROTECTED BY METAL CEILING -N- S- S- -10/03/2026- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED471225CS/005- N-Mar 9, 2031254401
 
Form
  Marine Equipment(TO)
Certification N. MED471225CS/005 - (ENG)
Certificate date 10/03/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.105

Model or Denomin.
Items
DECK PROTECTED BY METAL CEILING
Applicant DE WAVE S.R.L.
Place of requester Via De Marini 60  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference Documents SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616,IMO Circ. MSC.1 1621
Request 17/10/2025
Expire date 09/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED471225CS/005

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.105
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type DECK PROTECTED BY METAL CEILING
Applicant DE WAVE S.R.L.
Via De Marini 60,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference standards SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616; IMO Circ. MSC.1 1621
Issued in Genoa on
This Certificate is valid until
March 10, 2026
March 9, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED471225CS/005
Page 1 of 2

Product description

Membrane protection of the steel deck structural core performed, 400 mm below the deck plating, by a ceiling composed of panels having maximum length of 2348 mm and maximum width of 800 mm composed, moving from the side not exposed to the fire, of two layers of mineral wool (certified non combustible in conformity to the requirements of the IMO FTP Code), 20 mm thick each and having density of 110 kg/m3 glued, by means of 70 g/m2 of glue named FIRST, to a steel sheet having thickness of 0.7 mm. The panel joints consist of ā€œLā€ shaped sheet bent edges, relevant locking and fixing by means of rivets or screws fitted with pitch of 225 mm. The panels may be fitted, in the middle, with longitudinal omega shaped steel stiffeners, 1 mm thick and having dimensions of 30x20x60 mm glued to the steel sheet by means of adhesive type POWERFLEX.
The ceiling may also be produced by:
Wingeco srl - Via Geirato 150R/152R - 16138 Genova, Italy
Inoxking - Via Cal Longa 22, Vazzola (TV), Italy
Field of application
Fire resisting A-30 Class deck.
Reference documents
De Wave Srl drawing No. B1-05-L4_02 dated 4 February 2016 approved on 10 March 2016 with endorsement No. LABS-1224.
Tests carried out
Tests as per RINA Test Laboratory report No. 2015CS013922/1 issued on 10 March 2016 according to IMO 2010 FTP Code Part. 3




ATTACHMENT TO
CERTIFICATE No. MED471225CS/005
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****