FAB062225PUENG- -  -  N- Duplex Stainless grade: UNS S31803-470M/Z35,UNS S32205-470M/Z35 -N- S- S- -31/03/2025- Fabbricanti Approvati- - SN- N- - S-  - 2,344,443BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB062225PU- N-Aug 9, 20272344443
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB062225PU - (ENG)
Certificate date 31/03/2025
Type Approvazione di fabbricanti di materiali
Product Hot Rolled Steel Plates

Model or Denomin.
Items
Duplex Stainless grade: UNS S31803-470M/Z35,UNS S32205-470M/Z35
Applicant NIPPON STEEL CORPORATION
Place of requester 2-6-1 Marunouchi, Chiyoda-ku,  %  100-8071 Tokyo  % JAPAN
Tel. N.,Fax, Email yoneda.nt8.tsuyoshi@jp.nipponsteel.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 09/08/2027
Responsible Office RINA Korea Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB062225PU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Hot Rolled Steel Plates
Type Duplex Stainless grade: UNS S31803-470M/Z35
UNS S32205-470M/Z35

Applicant NIPPON STEEL CORPORATION
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until August 9, 2027
_________________________________
RINA Services S.p.A.
Sang Seok Lee
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB062225PU
Enclosure - Page 1 of 1
Duplex Stainless grade: UNS S31803-470M/Z35,UNS S32205-470M/Z35

APPROVAL CONDITIONS


- Steel making: Elctric Arc Furnace and AOD/VOD refining; Continuous Casting.

- Particulars:
Grade
Deoxidation
Delivery condition
Max. Thickness
(mm)
Z-quality
UNS S31803-470M
Killed
Solution
40
Z35
UNS S32205-470M
Killed
Solution
40
Z35

- Specification of chemistry analysis for ladle(%):
Grade
C
max.
Si
max.
Mn
max.
P
max.
S
max.
Cr
Ni
Mo
N
Cu max.
UNSS31803-470M
0.030
1.00
2.00
0.030
0.008
21.0-23.0
4.5-6.5
2.5-3.5
0.08-0.20
0.75
UNS S32205-470M
0.030
1.00
2.00
0.030
0.008
22.0-23.0
4.5-6.5
3.0-3.5
0.14-0.20
0.75

- Specification of mechanical properties:
Grade
0.2%YS(N/mm2) min
TS(N/mm2) min
EL(%) min
Average impact energy (J) min at -20°
KVL
KVT
UNS S31803-470M
470
660
25
41
27
UNS S32205-470M
470
660
25
41
27
Remark:
1) This approval only apply for Kyushu Works.
2) Ultrasonic testing necessary for Z quality is performed in accordance with ASTM A578 Level C:
- When testing plates less than 20mm thick, a probe frequency of 5MHz is used.
- When testing plates other than the above, a probe frequency of 2.25MHz is used.

Renewal/Revision:
- Reissued due to manufacturer's name change on April 1, 2025.
- This certificate annuls and replaces the certificate no. FAB120922PU.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Korea Marine April 1, 2025
**** NOTICE: This is NOT an official certificate ****