MED069324XGENG- -  -  N- Fireboy-Xintex FM-200 FES -N- S- S- -17/05/2024- Marine Equipment- - SN- S- - N-  - 206,287B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED069324XG- N-May 16, 2029206287
 
Form
  Marine Equipment(TO)
Certification N. MED069324XG - (ENG)
Certificate date 17/05/2024
Type Protezione antincendio
Product Equivalent fixed gas fire extinguishing systems components (extinguishing medium, head valves and nozzles) for machinery spaces and cargo pump rooms
Item Nº MED/3.45

Model or Denomin.
Items
Fireboy-Xintex FM-200 FES
Applicant FIREBOY-XINTEX UK Operations Ltd
Place of requester 10 HOLTON ROAD, HOLTON HEATH  %  BH16 6LT Poole  % UNITED KINGDOM
Tel. N.,Fax, Email 00448453899462, 00441202625376, raldous@fireboy-xintex.com
Directive (EU) 2023/1667
Standards IMO MSC/Circ.848 as amended, IMO MSC.1/Circ 1316.
Reference Documents SOLAS 74 Reg. II-2/10, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO Res.MSC.98(73)-(FSS Code) 5. IMO MSC/Circ.848, IMO MSC.1/Circ.1313, IMO MSC.1/Circ.1316.
Request 28/02/2018
Expire date 16/05/2029
Head Office Hamburg
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Giuseppe Russo S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED069324XG

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.45
Description Equivalent fixed gas fire extinguishing systems components (extinguishing medium, head valves and nozzles) for machinery spaces and cargo pump rooms
Type Fireboy-Xintex FM-200 FES
Applicant FIREBOY-XINTEX UK Operations Ltd
10 HOLTON ROAD,HOLTON HEATH,BH16 6LT Poole,UNITED KINGDOM
Testing standards IMO MSC/Circ.848 as amended, IMO MSC.1/Circ 1316.
Reference standards SOLAS 74 Reg. II-2/10, IMO Res. MSC.36(63)-(1994 HSC Code) 7, IMO Res. MSC.97(73)-(2000 HSC Code) 7, IMO Res.MSC.98(73)-(FSS Code) 5. IMO MSC/Circ.848, IMO MSC.1/Circ.1313, IMO MSC.1/Circ.1316.
Issued in Hamburg on
This Certificate is valid until
May 17, 2024
May 16, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Giuseppe Russo
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED069324XG
Page 1 of 2

Product description

Extinguishing agent
FM 200
Chemical denomination
1,1,1,2,3,3,3 - heptafluoropropane
Chemical formula
CF3CHFCF3
Cylinder capacity
8, 16, 32, 52, 106, 147, 180, 343 liters
Storage pressure
25 bars at 21° C (360 PSIG at 70° F)
Operating temperature
0° to 54° C ( 32° to 130° F)
Minimum design concentrate
8.7 %
NOAEL
9.0 %
LOAEL
10.5 %
Assembly cylinder position
Vertical only

Field of application

Fixed gas fire-extinguishing systems for use in machinery spaces of category A and cargo pump-rooms equivalent to fire-extinguishing systems required by SOLAS Ch II-2, Reg 7.

Reference documents

"Fireboy-Xintex Marine HFC-227ea System, Design, Installation, Recharge and Maintenance Manual", n° 91044, Rev 11-8-11, issued by Fireboy-Xintex and filed by RINA with n° CSST 11175.


Tests carried out

U.S.C.G Research and Development Center, report n°CG-D-02-99, filed by RINA with n° CSST 2462;

Underwriters Laboratories Inc. Report n° Ex5104 dated August 17, 2001 and filed by RINA with CSST 2461.





ATTACHMENT TO
CERTIFICATE No. MED069324XG
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giuseppe Russo
**** NOTICE: This is NOT an official certificate ****