MED020924CS!003ENG- -  -  N- SSRE A60 WT -N- S- S- -15/02/2024- Marine Equipment- - SN- S- - N-  - 1,075,374B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED020924CS/003- N-Feb 14, 20291075374
 
Form
  Marine Equipment(TO)
Certification N. MED020924CS/003 - (ENG)
Certificate date 15/02/2024
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
SSRE A60 WT
Applicant CARETTA SYSTEMS SA
Place of requester THESI PRARI MOUSTAKI  %  19300 Aspropyrgos  % GREECE
Tel. N.,Fax, Email 302105573694, ---, INFO@CARETTA-SYSTEMS.COM
Directive (EU) 2023/1667
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 09/02/2024
Expire date 14/02/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED020924CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type SSRE A60 WT
Applicant CARETTA SYSTEMS SA
THESI PRARI MOUSTAKI,19300 Aspropyrgos,GREECE
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
February 15, 2024
February 14, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED020924CS/003
Page 1 of 2

Product description

Single leaf sliding door whose maximum clear opening dimensions are 2410 mm (W) and 2210 mm (H). The leaf, having maximum width of 2506 mm and maximum height of 2311 mm, is made of two steel sheets and, in between, the insulating material. This insulating material is made of one single panel of a composite material composed of two skins of material type NEPTUNE SHEET or type CARETTA SHEET, 5 mm thick each and having density of 1250 kg/m3 and, in between, a layer of mineral wool type ROCKWOOL SEAROX SL450, 40 mm thick and having density of 160 kg/m3. Horizontal stiffeners made of U shaped steel profiles having dimensions of 20x40x20 mm and thickness of 1.2 mm are fitted, between the two skins, every 250 mm. The vertical joint in the middle of the leaf is restored by overlapping a steel sheet having width of 60 mm and thickness of 2 mm. The perimeter of the leaf, between the two skins, is fitted with NEPTUNE SHEET or CARETTA SHEET stiffeners having thickness of 5 mm. The perimeter of the leaf on the vertical sides is also fitted with a steel flat bar having dimensions of 40x8 mm. The steel sliding guide type Helm/Niko no 24, is fixed to the bulkhead by means of five steel brackets 8 mm thick. The door frame, composed of steel profiles having thickness of 3 mm or 6 mm, is fitted with intumescent strips type Kerafix 15x1 mm and silicon rubber seals type TOVO gomma 7001 60 rossa. The door frame is fixed to the bulkhead by means of M8x20 bolts with pitch of 200 mm.
Field of application
Fire resistant A-60 Class single leaf sliding door with the fire hazard on both sides in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
Reference documents
PANMERC MARINE DOORS AND PANEL LTD drawing No. SSR-A60-120 Rev. A dated 13 January 2017 approved on 31 August 2017 with endorsement No. LABS-1520.
PANMERC MARINE DOORS AND PANEL LTD drawing No. SSR-A60-130 Rev. A dated 11 May 2017 approved on 31 August 2017 with endorsement No. LABS-1521.
Tests carried out
Tests as per RINA Test Laboratory reports No. 2016CS01980/5 and No. 2016CS01980/6 issued on 31 August 2017 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED020924CS/003
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****