MED422323CS!001ENGD- -  -  N- A60DHB1V - A60 Hinged Door Single Leaf -N- S- S- -12/01/2024- Marine Equipment- - SN- S- - N-  - 597,421B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED422323CS/001- N-Jan 11, 2029597421
 
Form
  Marine Equipment(TO)
Certification N. MED422323CS/001 - (ENG)
Certificate date 12/01/2024
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
A60DHB1V - A60 Hinged Door Single Leaf
Applicant BLU BUD SRL
Place of requester VIA CORSICA 21/20  %  16128 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0108601379, 0108183053, info@blubud.it
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 27/11/2023
Validity 11/01/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED422323CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type A60DHB1V - A60 Hinged Door Single Leaf
Applicant BLU BUD SRL
VIA CORSICA 21/20,16128 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
January 12, 2024
January 11, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED422323CS/001
Page 1 of 2

Product description

Single leaf hinged door whose clear opening size is 1000 mm wide and 2200 mm high. The leaf is composed, moving from the exposed side to the fire, of a steel sheet 1.5 mm thick, an insulating material composed of one layer of non-combustible material type PLURATECTH MARINE PLUS 19 mm thick and density of 860 kg/m3, a layer of mineral wool type PAROC MARINE SLAB 150 40 mm thick and density of 150 kg/m3 and a steel sheet 1.5 mm thick. The insulating material is glue to steel sheet by means of adhesive type PROTOPUR AE 150. The door frame is welded to the bulkhead and composed of a steel profile 5 mm thick. On the rabbet between leaf and frame the frame present a bended edge where a silicone gasket type GMP is fitted while on the hollow side of frame a reinforcement of steel plate with dimensions of 89x39.5 mm are welded. The leaf is equipped with 3 hinges, with a circular peephole with diameter 40 mm and a door lock type RAZETO & CASARETO No. 503612. The sill is composed by means of a bended steel profile having thickness of 5 mm.
Field of application
Fire resistant A-60 Class single leaf hinged door for general application in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents
BLU BUD drawing No. A60DHB1V Rev.2 dated 11 January 2024 enclosed on Test Report No. 2023CS014223 issued on 11 January 2024.
Tests carried out
Test as per RINA Test Laboratory report No. 2023CS014223 issued on 11 January 2024 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED422323CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****