FAB128922XH!001ENGD- -  -  N- GRADES 5083 H111 - H116 - H321, 5086 H116 -N- S- S- -24/05/2022- Fabbricanti Approvati- - SN- N- - S-  - 380,205BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB128922XH/001- N-May 24, 2027380205
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB128922XH/001 - (ENG)
Certificate date 24/05/2022
Type Approvazione di fabbricanti di materiali
Product Lamiere in lega di alluminio

Model or Denomin.
Items
GRADES 5083 H111 - H116 - H321, 5086 H116
Applicant ELVAL HELLENIC ALUMINIUM INDUSTRY S.A.
Place of requester 61ST NATIONAL ROAD ATHENS-LAMIA  %  320 11 Oinofyta  % GREECE
Tel. N.,Fax, Email 2262053482, 2262031347, ikouma@elval.vionet.gr
Standards RINA Rules for the approval of manufacturers of materials
Expire date 24/05/2027
Responsible Office RINA Greece Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB128922XH/001
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Aluminium alloy sheets and plates
Type
GRADES 5083 H111 - H116 - H321,5086 H116
Applicant ELVAL HELLENIC ALUMINIUM INDUSTRY S.A.
61ST NATIONAL ROAD ATHENS-LAMIA
320 11 Oinofyta
GREECE
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until May 24, 2027
_________________________________
RINA Services S.p.A.
Andreas Papalimneos
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

FAB128922XH/001
APPROVAL CONDITIONS




- The chemical composition and the mechanical properties are to be in accordance with the RINA requirements

- The products are to be tested according to the RINA Rules

- The approval is valid for products from 13 mm up to 50 mm thickness

- The assembly by welding shall be carried out by welding processes and consumables approved by RINA for the concerned grade of alloy.

-

 
**** NOTICE: This is NOT an official certificate ****