MED408323WS!004ENGF- -  -  N- DZA14 -N- S- S- -24/08/2024- Marine Equipment- - SN- S- - N-  - 201,826B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED408323WS/004- N-Aug 23, 2029201826
 
Form
  Marine Equipment(TO)
MED024725WS/004,MED024725WS/008,MED378925WS/008,MED215625WS/004,MED215625WS/008,
MED633825WS/004,MED239426WS/004,MED480826WS/004,MED645426WS/004,MED670426WS/004
Certification N. MED408323WS/004 - (ENG)
Certificate date 24/08/2024
Type Mezzi di salvataggio
Product Winches for survival craft and rescue boats: (d) rescue boats
Item Nº MED/1.41d

Model or Denomin.
Items
DZA14
Applicant FASSMER-MARLAND INT'L LTD.
Place of requester No.23 Hemin Road, Cuiheng New District 528437, Zhongshan(Guangdong), CHINA
Tel. N.,Fax, Email 18319951964, ---, Johnny@fassmer-marland.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.81(70), as amended.
Reference Documents Reg.III/4, III/16, III/17, III/23, III/34 of SOLAS 74 Convention as amended,IMO Res. MSC.48(66) - LSA code as amended,IMO MSC.1/Circ.1632.
Expire date 23/08/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED408323WS/004

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.41d
Description Winches for survival craft and rescue boats: (d) rescue boats
Type DZA14
Applicant FASSMER-MARLAND INT'L LTD.
No.23 Hemin Road, Cuiheng New District 528437, Zhongshan(Guangdong), CHINA
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards Reg.III/4, III/16, III/17, III/23, III/34 of SOLAS 74 Convention as amended; IMO Res. MSC.48(66) - LSA code as amended; IMO MSC.1/Circ.1632.
Issued in SHANGHAI on
This Certificate is valid until
August 24, 2024
August 23, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED408323WS/004
Page 1 of 2
TECHNICAL DATA

Product Description:
- Maximum Working Load: 21 kN
- Minimum Lowering Load: 5 kN
- Maximum Hoisting Load: 14 kN
- Arrangement/positioning of launching appliance on board of the ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).
- Reference is to be made to approved drawing SHST-48452 and relevant test report.

REFERENCE DOCUMENTS
Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-48452 FSAR21 Single Arm Slewing Davit & DZA14 Winch (SHST/2023/1243/LEIGU), SHST-53229 FSAR21 Davit and DZA14 Winch Test Report (SHST/2024/1329/LEIGU), SHST-48451 FSAR21 Davit & DZA14 Winch MED Module B Application form/ SHST-48454 Risk assessment for FSAR21 Davit and DZA14 Winch(SHST/2023/1242/LEIGU).

TESTS CARRIED OUT
In accordance with IMO Resolution MSC.81(70) as amended, as per test report filed with SHST-53229.

NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.

Installation, on board testing shall be accepted by attending surveyor.





ATTACHMENT TO
CERTIFICATE No. MED408323WS/004
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****