Product description:
The IOM-10 module (46WIOM, 46WIOM_I and 46WIOM_I_SP) is a universal configurable microprocessor based data acquisition unit. The unit is designed for mounting directly on the engine.
Diagnostics:
Internal temperature monitoring
Monitoring of reference voltage
Out of range, short circuit, open circuit for analogue measurements
System diagnostics, watchdog
Power supply features:
The module is supplied from two redundant power supply buses , 24V DC.
Electronic fuses are implemented on power input in the module.
Supply voltages to the sensors are provided by the IOM module
Power supply diagnostics:
- Monitoring of supply voltage and fuses in module
- LED indication for fuse and supply voltage monitoring
I/O channels:
4 inputs and 1 ref. Module ID, binary
16 ch. Analogue inputs: (eg. T/C (K), PT100-3wire, 0/4-20mA, ratiometric)
4 ch. Digital input/output
2 ch. Digital output: (High side driver for eg. solenoids - 50 to 500Hz)
2 ch. Analog output: (4-20mA, individually isolated)
2 ch. Frequency input: (0-15kHz, magnetic or PNP, Push-Pull)
2 ch. +24Vcc reference
2 ch. CAN Bus: 500 kbit/s - redundant WE-CAN+CANopen - not fully CAN2.0B compliant
Documentation:
Parker: - IOM-10 Hardware Specification 1.6; WIOM05 Component Assembly; WIOM05_SCH;
- 2251AZ_Main_Assembly_05; 2251PZ_Enclosure_06;
- 46WIOM ver 7.0 Parts list; 46WIOM_I ver 7.0 Parts list; 46WIOM_I_SP ver 7.0 Parts list;
- ECO 0522; ECO 0550; IOM-10 rev 7.0 Change Summary
Wärtsilä: - IOM-10 short description; IOM-10_requirement_spec
Vansco/Parker: - IOM-10 Type approval test plan; IOM-10 additional EMC test plan 7
Test reports:
SGS: - 10941 dated 20/12/2006; 17903 dated 22 January 2014; 244024-1 dated 30/11/2006 and
291260-1 dated 07.03.2018; HELEM2106000273-1 dated 02.09.2021; HELEM2110000410 dated 07.10.2021;
VTT: - VTT-S-12074-06
The IOM-10 module has been tested and fulfils the conditions mentioned in IACS UR E10, rev.7.
Remarks:
This certificate is not covering neither specific operation of IOM-10 module nor the relevant application software.
Specific operation and relevant application software shall be separately tested and approved in the actual system configuration according to Wartsila requirements.
This certificate replaces the previous certificate No. ELE220716XG/003.