MED319922CS!002ENGF- -  -  N- B15PRO2A -N- S- S- -27/07/2022- Marine Equipment- - SN- S- - N-  - 1,047,638B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED319922CS/002- N-Jul 17, 20271047638
 
Form
  Marine Equipment(TO)
MED004922TS/084,MED004922TS/075,MED004922TS/080,MED004922TS/081,MED004922TS/111,
MED004922TS/098,MED000223TS/013,MED000223TS/014,MED000223TS/065,MED003824TS/004,
MED003824TS/071,MED003824TS/086,MED003824TS/117
Certification N. MED319922CS/002 - (ENG)
Certificate date 27/07/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
B15PRO2A
Applicant S.I.N. SERVICE SRL
Place of requester VIA DEL PESCATORE 3  %  80053 Castellammare Di Stabia (NA)  % ITALY
Tel. N.,Fax, Email 081 8018602, 081 8727940, ---
Directive (EU) 2021/1158
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 18/07/2022
Validity 17/07/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED319922CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type B15PRO2A
Applicant S.I.N. SERVICE SRL
VIA DEL PESCATORE 3,80053 Castellammare Di Stabia (NA),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
July 27, 2022
July 17, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED319922CS/002
Page 1 of 2

Product description

Double leaf hinged door with maximum clear light of 2030x2100 mm (WxH). The leaves, having, each, maximum dimensions of 1029x2110 mm (WxH) are composed of two steel sheets, 1.2 mm thick each and, in between, the insulating material composed of a layer of material named PROMASIL MARINE, 35 mm thick and having density of 285 kg/m3. The insulating material is glued to the steel sheets by means of 500 g/ m2 of adhesive type PROMACOL MARINE. The door frame is composed of an hollow steel profile, 1.5 mm thick and having dimensions of 40x48.7 mm; the frame, on the upper side has dimensions of 125x48.7 mm and is filled with mineral wool type SEAROX SL 660 or SEAROX SL 440 having density of 150 kg/m3. The leaves may be fitted with a rectangular window having maximum clear light of 300x400 mm (WxH); the glass compound, type PYROBELYTE 12 (manufacturer Glaverbel) and having total thickness of 12 mm, is composed of 3 panes and, in between, 2 layers of thermo-expanding gel. The window frame is composed of stainless steel profiles having thickness of 1.2 mm fixed to the leaf with rivets fitted with pitch of 100 mm; between glass and frame gaskets type PAPERSEAL ECO (thickness of 3 mm), are fitted.
Field of application
Fire resistant B-15 Class double leaf hinged door.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents
SIN SERVICE drawing No. B15PRO2A dated 29 June 2017 approved on 18 July 2017 with endorsement No. LABS-1503.
Tests carried out
Test as per RINA Test Laboratory report No. 2017CS011936/2 issued on 18 July 2017 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED319922CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****