MED511525CS!062ENGD- -  -  N- MI W B15/EL -N- S- S- -05/05/2026- Marine Equipment- - SN- S- - N-  - 2,370,495B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/062- N-Dec 1, 20302370495
 
Form
  Marine Equipment(TO)
Certification N. MED511525CS/062 - (ENG)
Certificate date 05/05/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model
Items/Sizes
MI W B15/EL
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents IMO Circ. MSC 1120,IMO MSC.1/Circ. 1581,SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9
Request 2/12/2020
Validity 01/12/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/062

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type MI W B15/EL
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards IMO Circ. MSC 1120; IMO MSC.1/Circ. 1581; SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
May 5, 2026
December 1, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/062
Page 1 of 2

Product description

Bulkhead consisting of panels having maximum height of 2400 mm and maximum width of 600 mm. The panels are composed of a mineral wool layer fitted with glass veil type ISOVERD Ultimate U SeaProtect slab 100 V1, (certified non combustible in conformity to the requirements of the IMO FTP Code), 15 mm thick and having density of 100 kg/m3 glued, by means of 100 g/m2 of glue named PROTOPUR AE 100 or 140 g/m2 of glue type SikaForce-110 to a steel sheet having thickness of 0.7 mm. The mineral wool is covered with a layer of material coated with a glass cloth named FIREMASTER MARINE PLUS BLANKET GC, 19 mm thick and having density of 96 kg/m3. The bulkhead may be fitted, at the maximum height of 2130 mm, with metallic box, 35 mm deep and having maximum dimensions of 94x55 mm, composed of steel sheet having thickness of 0.6 mm. The box is insulated, on the outside, by means of the FIREMASTER MARINE PLUS BLANKET GC layer. The insulating materials are fixed by means of steel staples fitted with pitch of 350 mm. The panel joints consist of ā€œLā€ shaped sheet bent edges, relevant locking and fixing by means of screws fitted with pitch of 350 mm. The joints are equipped with a layer of FIREMASTER MARINE PLUS BLANKET having thickness of 19 mm and are covered by means of a restore steel profile type 27CM14724, 0.5 mm thick, fixed by means of screws fitted with pitch of 350 mm. The panels are provided with horizontal stiffeners, 1.2 mm thick and having dimensions of 30x12 mm, glued with 150 g/m2 of EXTRABOND NO FIRE adhesive to the sheet with pitch of 600 mm. The bulkhead is fitted, on the perimeter, with U shaped steel containment profiles having dimensions of 35x50 mm and thickness of 2 mm provided of screws with pitch of 200 mm.
Field of application
Fire resistant B-15 Class bulkhead for general applications.
Reference documents
Marine Interiors SpA drawing No. +24PC00277.01 Rev. 01 dated 12 December 2017 and Marine Interiors Cabins SpA drawing No. 24PC00347 Rev. 01 dated 22 October 2020, approved on 14 March 2018 and on 2 December 2020 respectively with endorsement No. LABS-1622 and No. LABS-2112.
Tests carried out
Tests as per RINA Test Laboratory reports No. 2017CS013976 dated 14 March 2018 and No. 2020CS012817/6 dated 2 December 2020 issued according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/062
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****