MED389624CS!001ENG- -  -  N- Bofor FLWT A60 Door (Bofor Flush Watertight A60 Hinged Door) -N- S- S- -14/04/2025- Marine Equipment- - SN- S- - N-  - 166,397B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED389624CS/001- N-Apr 13, 2030166397
 
Form
  Marine Equipment(TO)
Certification N. MED389624CS/001 - (ENG)
Certificate date 14/04/2025
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
Bofor FLWT A60 Door (Bofor Flush Watertight A60 Hinged Door)
Applicant BOFOR DENIZCILIK SANAYI VE TICARET LTD.STI.
Place of requester AYDINLI BIRLIK OSB MAH., BATI CAD., No.28  %  34953 Tuzla  % TURKEY
Tel. N.,Fax, Email +90 216 466 4619, +90 216 466 4621, volkanbalci@bofor.com.tr
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Request 02/09/2024
Expire date 13/04/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED389624CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type Bofor FLWT A60 Door (Bofor Flush Watertight A60 Hinged Door)
Applicant BOFOR DENIZCILIK SANAYI VE TICARET LTD.STI.
AYDINLI BIRLIK OSB MAH., BATI CAD., No.28,34953 Tuzla,TURKEY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Issued in Genoa on
This Certificate is valid until
April 14, 2025
April 13, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED389624CS/001
Page 1 of 3

Product description



Single leaf hinged door whose clear opening size is 997 mm wide, 1997 mm high and having radiused corners. The door leaf is composed of a steel plate 6 mm thick having the edges bended on the rabbet and of a steel sheet 3 mm thick, fitted on the side opposite to the opening. Between the two sheets an insulating material compound is fitted. The insulation material compound is composed, moving from the side not exposed to the fire, of a layer of mineral wool type ROCKWOOL SEAROX SL 620 having thickness of 50 mm and density of 100 kg/m3, a stell sheet having thickness of 2 mm, a layer of insulating material named PROMAGUARD 6 mm thick and density of 240 kg/m3, a void space for the lever closing device movement and one layer of the same material PROMAGUARD. The PROMAGUARD layers are fixed to the steel sheets by means of steel pins; Inside the leaf steel stiffeners, 3 longitudinal and 7 transversals, having dimensions of 50x8 mm, are welded to steel plate 6 mm thick. The door frame is composed of a carbon steel profile having thickness of 6 mm bolted to the bulkhead by means of M8 bolts. The frame is insulated for a width of 100 mm with two layers of mineral wool type ROCKWOOL SEAROX WM 620 having density of 90 kg/m3 and thickness 45mm each. The frame makes the closure tight with the neoprene gasket fitted in the leaf bended edges with an L shaped steel profile 6 mm thick welded to the frame and protected by intumescent sealer type Astroflame and Intumescent Seal. The door is equipped with 4 hinges and a lever closing device that acts on 12 points fitted inside the leaf and actuated by a central handwheel.







 



ATTACHMENT TO
CERTIFICATE Nr. MED389624CS/001
Page 2 of 3


Field of application

Fire resistant A-60 Class single leaf hinged watertight door (maximum hydrostatic head of 0.5 bar applied on inside face, opposite to the hinges) in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
Reference documents

Bofor drawings No. BFDA60-2 Rev3 dated 27 November 2024 enclosed on Test Report No.2024CS013896/1 issued on 27 November 2024.
Tests carried out

Test as per RINA Test Laboratory Report No. 2024CS013896/1 issued on 27 November 2024 according to 2010 IMO FTP Code Part 3 Annex 1 and to IMO MSC.1/Circ. 1319 dated 11 June 2009. Hydrostatic Test as per RINA Turkey Test Report No. 2023XT013047 dated 22 February 2024.




ATTACHMENT TO
CERTIFICATE No. MED389624CS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****