1. Product Description
1.1 Type and Range
+ low voltage shipboard electrical power cables with following characteristics:
Type
Designation | Rated
Volt.
[㎸] | Number of
Cores | Nominal Conductor
Cross-sectional
Area [㎟] | Maximum rated
Conductor
Temperature [℃] | Fire Property |
SC/NC
CJPJ; CJPJ80;CJPJ90;CJPJ85; CJPJ95;CJPJR;
CJ85;CJ95; | 0.6/1 | 1
2
3
4
5 ~ 37 | 1.0 ~ 300
1.0 ~ 120
1.0 ~ 185
1.0 ~ 150
1.0, 1.5, 2.5 | 90 | IEC60092-350
IEC60092-353
IEC60332-3-22
IEC60331
(only;NC)
IEC60754
IEC61034 |
SC/NC
CJPF;CJPF80;CJPF90;CJPF86; CJPF96;CJPFR;
CJ86;CJ96 |
Note:
+“Conductor Cross-section” is selected from the following series of conductor size:
1.0, 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 mm2
+“Number of Core” is selected from the following series of core number:
4, 5, 6, 7, 10, 12, 14, 16, 19, 24, 27, 30, 33, 37
1.2 Meaning of the letters of the type
+ Conductor: stranded annealed copper (class 2)
+Abbreviation:
C: Shipboard Electric Power Cable
J: Cross-linked Polyethylene Insulation(XLPE)
PJ: Cross-linked PO-SHF2 Inner Sheath
PF: PO-SHF1 Inner Sheath
R : Stranded tinned annealed copper - Class 5
+Outer Protection:
8: Copper Wires Braid
9: Galvanized steel Wires Braid
5: Cross-linked PO-SHF2 Outer Sheath
6: PO-SHF1 Outer Sheath
0: No outer sheath
TYPE APPROVAL CERTIFICATE |
No. ELE694524WS/001 |
Enclosure - Page 2 of 2 |
+Flammability Code:
SC: Bunched cable flame Retardant, Halogen Free, Low Smoke IEC60332-3-22:2018(Cat.A), IEC60754-1/2:2019, IEC61034-1/2:2019
NC: Bunched cable flame Retardant, Halogen Free, Low Smoke, Fire Resistant IEC60332-3-22:2018(Cat.A), IEC60754-1/2:2019, IEC61034-1/2:2019, IEC60331:2018
2. Reference Documents:
+ Manufacturer instruction filed by RINA with drawing No. SHEL-22049.
+ Specification of products filed by RINA with drawing No. SHEL-22051.
+Test report "Shanghai Intelligent Service and Technology Co., Ltd" Report No.: TN23-5631, TN23-4938, TN23-4866E, and TN24-5539E. Filed by RINA with drawing No.SHEL-22037 to SHEL-22040.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-22046.
+ Routine test report and Narrative report signed by attending Surveyor and filed by RINA with drawing No. SHEL-22052 and SHEL-22050..
3. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment.
4. Renewal/Revision
+ February 22, 2016: initial certification. Certificate No. ELE024216PU/001.
+ December 24, 2024: renewed with partially modification. New certificate No. ELE694524WS/001 revokes previous certificate. |
|