DIP288922CS!002BILB- -  -  N- SikaForce®-436 L25 (former Adekit A 236-25)  -N- S- S- -10/01/2023- Prodotti per nautica diporto- - NN- N- Andrea Venturelli- N-  - 461,446Andrea VenturelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP288922CS/002- N-Jan 9, 2028461446
 
Form
  Prodotti per nautica diporto(TO)
DIP288922CS/002
Certification N. DIP288922CS/002 - (BIL)
Certificate date 10/01/2023
Product Adesivo Strutturale

Model or Denomin.
Items
SikaForce®-436 L25 (former Adekit A 236-25)
Applicant SIKA SERVICES AG · INDUSTRY
Place of requester TUEFFENWIES 16  %  CH-8048 ZURICH  % SWITZERLAND
Tel. N.,Fax, Email 0041 58 436 58 22, 0041 58 436 54 07, mueller.ulli@ch.sika.com
Directive NONE
Standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Expire date 09/01/2028
Head Office Viareggio
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP288922CS/002
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Adesivo Strutturale
Description Structural Adhesive
Tipo SikaForce®-436 L25 (former Adekit A 236-25)
Type
Norme di riferimento Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Reference standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts








_________________________________
RINA Services S.p.A.
  
Antonio CuomoAndrea Venturelli
       
Rilasciato a Viareggio il 10  Gennaio  2023.  Questo Certificato è valido fino al 9 Gennaio 2028
   
Issued in Viareggio  on January 10, 2023. This Certificate is valid until January 9, 2028
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
N. DIP288922CS/002
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
SikaForce®-436 L25 (former Adekit A 236-25)
Descrizione prodotto

Product description
Sistema di adesivo bicomponente basato su poliuretani.

2-component adhesive system based on polyurethan.
Campo di applicazione


Field of application
Giunzione di componenti a condizione che l'adesivo sia compatibile con i materiali base.

Joining of components on condition that the adhesive material is compatible to the base materials .
Dati Prodotto













Product Data
Caratteristica
Standard
Valore
Resistenza a taglio a 23°C su materiale metallico
ASTM D3165
7.25 MPa
Resistenza a taglio a 23°C su GRP
ASTM D3165
6.81 MPa
Resistenza a strappo a 23°C su materiale metallico
ASTM D3807
35.25 N/cm
Resistenza a strappo a 23°C su GRP
ASTM D3807
56.11 N/cm
Resistenza a taglio riferiti ai test su provini soggetti a invecchiamento artificiale in accordo con ASTM D1183. (Rapporto di prova del progetto n.00816-IT-00007-ABe).


Characteristic
Standard
Value
Lap shear strength at 23°C on metallic material
ASTM D3165
7.25 MPa
Lap shear strength at 23°C
on GRP material
ASTM D3165
6.81 MPa
Peel strength at 23°C on metallic material
ASTM D3807
35.25 N/cm
Peel strength at 23°C
on GRP material
ASTM D3807
56.11 N/cm
Lap shear strength value after exposure ageing according to ASTM D1183 Standard. (test report of the job n.00816-IT-00007-ABe).
Condizioni di accettazione








Acceptance conditions
1. Incollaggio di componenti strutturali in materiale composito (GRP) e in metallo.

2. I criteri di progetto dei giunti dovranno rispondere ai Regolamenti RINA ed alle specifiche tecniche del Fabbricante.

3. Le procedure per la preparazione delle superfici ed i particolari di incollaggio dovranno essere in accordo alle istruzioni del Fabbricante.

1. Structural bonding of coposite parts in GRP and metallic material .

2. Design criteria for bonding connections shall comply with RINA Rules and Manufacturer's technical instructions.

3. Procedure for surface preparation and bonding items according to Manufacturer's instructions.



Viareggio 10  Gennaio  2023 
Viareggio January 10, 2023
**** NOTICE: This is NOT an official certificate ****