FAB037222MIENG- -  -  N- Carbon Steel: Diam.max.1300 mm/Weight max.3000 kgs,Austenitic Stainless Steel: Diam.max.1100 mm/Weight max.2000 kgs. -N- S- S- -23/06/2022- Fabbricanti Approvati- - NN- N- - S-  - 578,539BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB037222MI- N-Jun 23, 2027578539
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB037222MI - (ENG)
Certificate date 23/06/2022
Type Approvazione di fabbricanti di materiali
Product Fucinati in acciaio

Model or Denomin.
Items
Carbon Steel: Diam.max.1300 mm/Weight max.3000 kgs,Austenitic Stainless Steel: Diam.max.1100 mm/Weight max.2000 kgs.
Applicant FORGE NICROMO SPA
Place of requester VIA PROVINCIALE, 57  %  23813 Cortenova (LC)  % ITALY
Tel. N.,Fax, Email +39 341979831, 0341982228, qualita@forgenicromo.it
Standards RINA Rules for the approval of manufacturers of materials
Expire date 23/06/2027
Responsible Office Milano
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB037222MI
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel forgings
Type Carbon Steel: Diam.max.1300 mm/Weight max.3000 kgs
Austenitic Stainless Steel: Diam.max.1100 mm/Weight max.2000 kgs.

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until June 23, 2027
_________________________________
RINA Services S.p.A.
Daniele Mangini
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB037222MI
Enclosure - Page 1 of 1
Carbon Steel,Austenitic Stainless Steel,Low Alloy Steel,Martensitic Stainless Steel,Alloy Steel,Duplex,Super Duplex

APPROVAL CONDITIONS




Forging Process:
(in House facility): normalizing;
(carried out by external sub-supplier): quanching and tempering; annealing solution.



Delivery Conditions:
rough and finishing machined.



Survey Conditions:
all forgings to be used for construction of ship classed with RINA shall meet the requirements of the RINA Rules (Part.D; Chapter 2; Section 3) and shall be tested accordingly.



This certificate may be extended to heavier weights than indicated in the individual types of materials by carrying out tests on the new quantities.





General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

Milano June 23, 2022
**** NOTICE: This is NOT an official certificate ****