The following test methods and standards / instructions are used in the "Meyer Werft" laboratory.
1 Non-destructive tests
1.1 Ultrasonic tests
| DIN EN 10160 | Ultrasonic testing of steel flat product of thickness equal to or greater than 6mm (reflection method) |
| DIN EN 10228-3 | Ultrasonic testing of ferritic or martensitic steel forgings |
| DIN EN 12680-1 | Ultrasonic examination - Part 1: Steel castings for general purposes |
| DIN EN 14127 | Non-destructive testing – Ultrasonic thickness measurement |
| DIN EN ISO 11666 | Non-destructive testing of welds – Ultrasonic testing – Acceptance levels |
| DIN EN ISO 16811 | Non-destructive testing – Ultrasonic testing – Sensitivity and range setting |
| DIN EN ISO 17405 | Non-destructive testing – Ultrasonic testing – Technique of testing claddings produced by welding, rolling and explosion |
| DIN EN ISO 17640 | Non-destructive testing of welds – Ultrasonic testing – Techniques, testing levels, and assessment |
| DIN EN ISO 22825 | Non-destructive testing of welds – Ultrasonic testing – Testing of welds in austenitic steels and nickel-based alloys |
| DIN EN ISO 23279 | Non-destructive testing of welds – Ultrasonic testing – Characterization of
discontinuities in welds |
| SEP 19221) | Ultrasonic testing of forgins of ferritic steel |
| PA / Ti 00080 | Test instruction execution of ultrasonic test |
| PA / Ti 00178 | Test instruction test criteria and evaluation criteria of pressure vessel systems |
| PA / Ti 00211 | Test instruction ultrasonic test - Determination of burn-in depth on T-welding joints |
1.2 Phased – Array ultrasonic tests
| DIN EN ISO 13588 | Non-destructive testing of welds – Ultrasonic testing – Use of automated Phased
array technology |
| DIN EN ISO 19285 | Non-destructive testing of welds – Phased array ultrasonic testing (PAUT) –
Acceptance levels |
| PA / Ti 00073 | Test instruction Phased Array Ultrasonic testing (PAUT) |
1.3 Radiographic test / Digital Radiographic tests
| DIN EN ISO 10675-1 | Non-destructive testing of welds – Acceptance levels for radiographic testing –
Part 1: Steel, nickel, titanium and their alloys |
| DIN EN ISO 10675-2 | Non-destructive testing of welds – Acceptance levels for radiographic testing –
Part 2: Aluminium and its alloys |
| DIN EN ISO 17636-2 | Non-destructive testing of welds – Radiographic testing – Part 2: X-and gamma ray techniques with digital detectors |
| PA / Ti 00072 | Digital radiography on welded joints of metallic materials |
| PA / Ti 00178 | Testing criteria and evaluation criteria of pressure vessel systems |
| WS 00530 | Non-Destructive Testing on Piping Systems |
1.4 Dye penetration test
| DIN EN 1371-1 | Founding – Liquid penetrant testing – Part 1: Sand, gravity die and low pressure die castings |
| DIN EN 1371-2 | Founding – Liquid penetrant testing – Part 2: Investment castings |
| DIN EN 10228-2 | Non-destructive testing of steel forgings |
| DIN EN ISO 3452-1 | Non-destructive testing – Penetrant testing – Part 1: General principles |
| DIN EN ISO 23277 | Non-destructive testing of welds – Penetrant testing – Acceptance levels |
| PA / Ti 00081 | Test instruction execution of dye penetration test |
| PA / Ti 00178 | Testing criteria and evaluation criteria of pressure vessel systems |
1.5 Magnetic particle tests
| DIN EN 1369 | Founding – Magnetic particle testing |
| DIN EN 10228-1 | Non-destructive testing of steel forgings – Part 1: Magnetic particle inspection |
| DIN EN ISO 9934-1 | Non-destructive testing – Magnetic particle testing – Part 1: general principles |
| DIN EN ISO 17638 | Non-destructive testing of welds – Magnetic particle testing |
| DIN EN ISO 23278 | Non-destructive testing of welds – Magnetic particle testing – Acceptance levels |
| SEP 19351) | Surface crack testing of cast iron made of steel – Magnetic particle testing |
| PA / Ti 00082 | Test instruction of magnetic particle testing |
| PA / Ti 00178 | Testing criteria and evaluation criteria of pressure vessel systems |
1.6 Visual testing
| DIN EN 12454 | Founding – Visual examination of surface discontinuities – Steel sand castings |
| DIN EN 13018 | Non-destructive testing – Visual testing – General principles |
| DIN EN ISO 1370 | Founding – Examination of surface condition |
| DIN EN ISO 5817 | Welding – Fusion welded joints in steel, nickel, titanium and their alloys
(beam welding excluded) – Quality levels for imperfections |
| DIN EN ISO 6520-1 | Welding and allied processes – Classification of geometric imperfections in
metallic materials – Part1: Fusion Welding |
| DIN EN ISO 10042 | Welding – Arc welded joints in aluminium and its alloys – Quality levels for
imperfections |
| DIN EN ISO 17635 | Non-destructive testing of welds – General rules for metallic materials |
| DIN EN ISO 17637 | Non-destructive testing of welds – Radiographic testing – Part 1: X- and gamma-ray techniques with film |
| PA / TI 00045 | Testing and limits of admissibility of sheets |
| PA / TI 00083 | Execution of visual inspection |
| PA / Ti 00178 | Testing criteria and evaluation criteria of pressure vessel systems |
1.7 Leak testing
| DIN EN 1593 | Non-destructive testing – Leak testing – Bubble emissions techniques |
| DIN EN 1779 | Non-destructive testing – Leak testing – Criteria for the method and technique selection |
1.8 Thermographic testing
| DIN 54190-1 | Non-destructive testing – Thermographic testing – Part1: General principles |
| DIN 54191 | Non-destructive testing – Thermographic testing of electric installations |
| VDS 2585 | Thermography in electrical installations - A contribution to damage prevention and operational safety |
| PA / TI 00144 | Thermography test on machinery in marine technology |
| PA / TI 00145 | Thermography test on electrical installations in marine technology |
1.9 Optical emission spectrometry (OES)
| PA / TI 00227 | Execution of optical emission spectrometry (OES) |
| SEP 18051) | Sampling and sample preparation for piece analysis for steels |
2 Mechanical-technological testing
2.1 Tensile tests
| DIN EN 10164 | Steel products with improved deformation properties perpendicular to the
surface of the product – Technical delivery conditions |
| DIN EN ISO 4136 | Destructive tests on welds in metallic materials – Transverse tensile test |
| DIN EN ISO 5178 | Welding – Fusion welded joints in steel, nickel, titanium and their alloys
(beam welding excluded) – Quality levels for imperfections |
| DIN EN ISO 6892-1 | Metallic materials – Tensile testing – Part1: Method of test at room
temperature |
| DIN EN ISO 9018 | Destructive tests on welds in metallic materials – Tensile test on cruciform
an lapped joints |
| PA / TI 00075 | Test instruction execution of tensile test |
2.2 Impact notch test
| DIN EN ISO 148-1 | Metallic materials – Charpy pendulum impact test – Part1: Test Method |
| DIN EN ISO 377 | Steel and steel products – Location and preparation of samples and test
pieces for mechanical testing |
| DIN EN ISO 9016 | Destructive tests on welds in metallic materials – Impact tests – Test
specimen location, notch orientation and examination |
| PA / TI 00076 | Test instruction execution of impact notch test |
2.3 Bend tests
| DIN EN ISO 5173 | Destructive tests on welds in metallic materials – Bend tests |
| DIN EN ISO 7438 | Metallic materials – Bend test |
| DIN EN ISO 8492 | Metallic materials – Tube – Flattening test |
| SEP 1390 | Welding bending test |
| PA / TI 00085 | Test instruction execution of technological bending test |
2.4 Fracture test
| DIN EN ISO 9017 | Destructive tests on welds in metallic materials – Fracture test |
| PA / TI 00221 | Test instruction execution of fracture test |
2.5 Hardness tests
| DIN 50156-1 | Metallic materials - Leeb hardness test - Part 1: Test |
| DIN 50159-1 | Metallic materials – Hardness testing with the UCI method – Part 1: Test method |
| DIN EN ISO 6506-1 | Metallic materials – Brinell hardness test – Part1: Test method |
| DIN EN ISO 6507-1 | Metallic materials – Vickers hardness test – Part1: Test method |
| DIN EN ISO 6508-1 | Metallic materials – Rockwell hardness test – Part 1: Test method |
| DIN EN ISO 9015-1 | Destructive tests on welds in metallic materials – Hardness testing –
Part 1: Hardness test on arc welded joints |
| PA / TI 00077 | Test instruction execution of stationary hardness test |
| PA / TI 00078 | Test instruction execution of mobile hardness tests |
3 Metallographic structural tests
| DIN 50600 | Testing of metallic materials – Metallographic micrographs – Picture scales |
| DIN EN ISO 1463 | Metallic and oxide coatings – Measurement of coating thickness –Microscopical method |
| DIN EN ISO 17639 | Destructive tests on welds in metallic materials – Macroscopic and microscopic examination of welds |
| DIN CEN ISO/TR 16060 | Destructive tests on welds in metallic materials – Etchants for macroscopic and microscopic examination |
| DVS 29221) | Testing of burn-off stump, press stump and MBP Welding Joints |
| PA / TI 00084 | Test instruction execution of metallographic examinations |
Abbreviations used:
AD
DIN
DVS
EN
ISO
SEP | Working group for pressure vessels
German Institute for Standardization
German Association for Welding and Related Processes r. a.
European Standard
International Organization for Standardization
Steel-iron test sheets from the Association of German Ironworks |
General conditions for the approval
a) The initial conditions verified by RINA at the time of the assessment are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) RINA personnel are to be allowed to witness during the performances of activities, upon their request
d) The activities are to be carried out in compliance with RINA Rules and /or other applicable Rules
1) Withdrawn, but still usable as a normative document
* The latest edition has been attracted