MED425823CSENGD- -  -  N- MB LUBE OIL - SILVER 301 -N- S- S- -12/12/2023- Marine Equipment- - SN- S- - N-  - 119,286B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED425823CS- N-Dec 11, 2028119286
 
Form
  Marine Equipment(TO)
MED011624GE/002
Certification N. MED425823CS - (ENG)
Certificate date 12/12/2023
Type Protezione antincendio
Product Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Item Nº MED/3.15c

Model or Denomin.
Items
MB LUBE OIL - SILVER 301
Applicant MONTI & BARABINO S.P.A.
Place of requester VIA BURANELLO, 85 R  %  16149 SAMPIERDARENA (GE)  % ITALY
Tel. N.,Fax, Email 010 413341, 010 414281, quality@montiebarabino.it
Directive (EU) 2023/1667
Standards ISO 15540, ISO 15541
Reference Documents Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Expire date 11/12/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Rosario Pitruzzo S

EC TYPE EXAMINATION (MODULE B)
No. MED425823CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.15c
Description Materials other than steel for pipes conveying oil or fuel oil: (c) flexible pipes assemblies and compensators
Type MB LUBE OIL - SILVER 301
Applicant MONTI & BARABINO S.P.A.
VIA BURANELLO, 85 R,16149 SAMPIERDARENA (GE),ITALY
Testing standards applied ISO 15540, ISO 15541
Regulations specified and reference documents Regulation II-2/4.2.2.5.1 of SOLAS 74 Convention, as amended
Issued in Genoa on
This Certificate is valid until
December 12, 2023
December 11, 2028
This certificate consists of this page and 1 enclosure

________________________________________
Rosario Pitruzzo
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
No.  MED425823CS
Page 1 of 3


TECHNICAL DATA

The hose assembly consists of:

Flexible hose manufactured by PARKER HANNIFIN MANUFACTURING SRL, VIA G.B. PIRELLI 6, 22070 VENIANO (CO), type 301SN, designed according to standard EN 853-2SN (RINA type approval certificate MAC241320CS/001), composed by :

  • Inner tube:
Nitrile based synthetic rubber oil resistant
  • Reinforcment:
Two braids of high tensile steel wire
  • External lining:
Black synthetic rubber resistant to oils and weathering
  • Fittings:
Parker 48 series
provided with:
  • stainless steel (AISI 304) protective braid.




REFERENCE DOCUMENTS


PARKER HANNIFIN specifications nos. Hs-301SN and HS-K48.
MONTI & BARABINO drawing approved with no. PPVT-17780 on 11/02/2014.
Page 4/8 of MONTI & BARABINO booklet approved with no. MAC-10263 on 22/10/2004.
Test reports nos. 449/04, 450/04 and 486/04 dated 01/06/2004 of LAPI Laboratory.




ATTACHMENT TO
CERTIFICATE No. MED058619CS/003
Page 2 of 3


FIELD OF APPLICATIONS

Intended for petroleum base hydraulic fluids, lubrication oil, fresh water and compressed air.

Temperatures range: -40 °C / +100 °C, according to EN 853.


Maximum working pressure according to the following table:
ND
mm
Maximum working pressure
N/mm2
6,3
40
8
35
10
33
12,5
27,5
16
25
19
21,5
25
16,5
31,5
12,5
38
9
51
8




TESTS CARRIED OUT

Tests carried out by LAPI Laboratorio Prevenzione Incendi SRL, Via della Quercia 11, Loc. Le Querce, PRATO, according to ISO 15540 and ISO 15541, as per Test Reports nos. 449/04, 450/04 and 486/04 dated 01/06/2004.

REMARKS

The steel ties at each end are protected by heat-shrink PVC sleeves (yellow color), in order to avoid damage to the operator at installation. The external protective braid is marked with a thin yellow band, for prompt identification.




ATTACHMENT TO
No. MED425823CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Rosario Pitruzzo
**** NOTICE: This is NOT an official certificate ****