ELE425325CS!002ENG- -  -  N- LKM Series 0.6/1kV -N- S- S- -15/09/2025- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 353,343Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE425325CS/002- N-Sep 15, 2030353343
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE425325CS/002 - (ENG)
Certificate date 15/09/2025
Type Impianti Elettrici
Product CAVI ELETTRICI

Model or Denomin.
Items
LKM Series 0.6/1kV
Applicant HELMACAB OY
Place of requester LAKIMIEHENKATU 4  %  20780 Kaarina  % FINLAND
Tel. N.,Fax, Email +358 2 4108732, +358 2 2372428, ---
Standards RINA Rules for the Classification of Ships Pt C, Ch 2, Sec 9,IEC Standards (see Enclosure)
Expire date 15/09/2030
Head Office Genova
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE425325CS/002
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description ELECTRIC CABLES
Type LKM Series 0.6/1kV
Applicant HELMACAB OY
LAKIMIEHENKATU 4
20780 Kaarina
FINLAND
Reference standards RINA Rules for the Classification of Ships Pt C, Ch 2, Sec 9,IEC Standards (see Enclosure)
  

 
 
   .   This Certificate is valid until September 15, 2030
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE425325CS/002
Enclosure - Page 1 of 1
LKM Series 0.6/1kV
Materials/Components/type for shipboard power and control cables:

TypeCharacteristics
LKM-HF and LKM-SHF2 0.6/1kVflame retardant, low smoke emission, halogen free.
LKM-FRHF and LKM-FRSHF2 0.6/1KVhalogen free with low smoke emission, flame retardant, fire resistant
LKMM-HF and LKMM-SHF2 0.6/1KVhalogen free with low smoke emission, flame retardant
LKMSM-HF and LKMSM-SHF2 0.6/1KVhalogen free with low smoke emission, flame retardant, armoured
LKSM-EMC and LKSM-EMC-SHF2 0.6/1KVflame retardant, low smoke emission, halogen free, screened and armoured, designed to meet the requirements for enhanced Electromagnetic compatibility characteristics
LKSM-FRHF and LKSM-FRSHF2 0.6/1KVhalogen free with low smoke emission, screened, fire resisting, flame retardant
LKSM-HF and LKSM-SHF2 0.6/1KVflame retardant, low emission, halogen free, armoured
LKSM-EMC-FRHF and LKSM-EMC-FRSHF2 0.6/1KVhalogen free with low smoke emission, screened and armoured, fire resisting, flame retardant, designed to meet the requirements for enhanced Electromagnetic compatibility characteristics
LKAM-HF and LKAM-SHF2 0.6/1KVhalogen free, aluminium tape screened, flame retardant
LKAM-FRHF and LKAM-FRSHF2 0.6/1KVhalogen free, aluminuium tape screened, fire resistant, flame retardant
LKMSM-FRHF and LKMSM-FRSHF2 0.6/1kVhalogen free with low smoke emission, flame retardant, fire resistant
LKMM-FRHF and LKMM-FRSHF2 0.6/1 (1.2) kVhalogen free with low smoke emission, flame retardant, fire resistant

Rated voltage: 0.6/1 kV

Marking: "lot number" Cable Type n x s mm2 0.6/1 kV 90°c IEC 60092-353 IEC 60332-3-22 HELMACAB "month-year" "lenght marking"
Note:
  • cable with conductro of IEC 60228 calss 5 shall be marked on the sheath with "cl.5"
  • cables with tinned conductor shall be marked on the sheath with "CuSn"
  • cables with SHF2 sheath shall be marked on the sheath with "LKM-SHF2"
  • gas tight cables with "Filler gel" shall be marked with additional "GT"












TYPE APPROVAL CERTIFICATE
No. ELE425325CS/002
Enclosure - page 2 of 3
LKM Series 0.6/1kV
Construction:
TypeConductorInsulationStrandingFiller(s)SheathAdditional information
LKM-HF and LKM-SHF2stranded plain or tinned annealed copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together and covered by separator tape wrapping (not mandatory)OptionalSHF1 or SHF2-----
LKM-FRHF and LKM-FRSHF2stranded plain or tinned annealed copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together and covered by separator tape wrapping (not mandatory)OptionalSHF1 or SHF2
LKMM-HF and LKMM-SHF2stranded plain or tinned annealed copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together and covered by separator tape wrapping (not mandatoryCovered by a non-hygroscopic halogen free flame retardant filling materialSHF1 or SHF2----
LKMSM-HF and LKMSM-SHF2stranded plain or tinned annealed copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together and covered by separator tape (not mandatory)Covered by a non-hygroscopic halogen free flame retardant filling materialSHF1 or SHF2Armour: braided armour of annealed copper wires.
For GT, the stranding has the interstices filled with a gel compound
LKSM-EMC and LKSM-EMC-SHF2stranded plain or tinned annealed copper (IEC 60228 Cl.2 for 1.5-10mm2 or Cl.5 for 16-300mm2)XLPECores stranded together and covered by wrapped tape ----SHF1 or SHF2Armour: braided armour of annealed plain or tinned copper wire braid. Screen: collective metallic screen of plain copper tape
LKSM-FRHF and LKSM-FRSHF2stranded plain or tinned copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together and covered by wrapped tape ....SHF1 or SHF2Armour: plain or tinned copper wire braid. The armour may substitute the collective metallic screen
LKSM-HF and LKSM-SHF2stranded plain or tinned annealed copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together and covered by wrapped tape----SHF1 or SHF2Armour: plain copper wire braid (optional tinned copper wire braid)
LKSM-EMC-FRHF and LKSM-EMC-FRSHF2stranded plain or tinned copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together and covered by wrapped tape.---SHF1 or SHF2Screen: collective metallic screen of copper tape.
Armour: braided armour of annealed (or tinned) copper wires.
LKAM-HF and LKAM-SHF2stranded plain or tinned copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together and covered by wrapped tape----SHF1Collective screen: laminated electrostatic screen. Aluminium/polyester tape with a drain wire
LKAM-FRHF and LKAM-FRSHF2stranded plain or tinned copper (IEC 60228 Cl.2)XLPECores stranded together and covered by wrapped tape----SHF1 or SHF2screen: laminated electrostatic screen. Aluminium/polyester tape with a drain wire
LKMSM-FRHF and LKMSM-FRSHF2stranded plain or tinned copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded together. (GT cables, the interstices are filled up with a gel compound)Covered by a non-hygroscopic halogen free flame retardant filling materialSHF1 or SHF2Armour: braided armour of plain (or tinned) annealed copper wires.
The armour may be substitute the collective metallic screen
LKMM-FRHF and LKMM-FRSHF2stranded plain or tinned copper (IEC 60228 Cl.2 or Cl.5)XLPECores stranded togetherCovered by a non-hygroscopic halogen free flame retardant filling materialSHF1 or SHF2----

In accordance to IEC 60228 cl.2 and cl.5; IEC 60092-350;IEC 60092-353; IEC 60092-360 ; IEC 60754-1; IEC 61034-1; IEC 61034-2; IEC 60332-1; IEC 60332-3-22; RINA Rules; RINAMIL Rules; RINA Rules for FSRU; RINAMIL for FREMM; RINA Rues for FPV.

Maximum conductor temperature: 90°C

Technical Specification:
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.3/104 11.11.2024/dk (LKM-HF and LKM-SHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.38/106 11.11.2024/dk (LKMM-HF and LKMM-SHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.5/105 11.11.2024/dk (LKSM-HF and LKSM-SHF20.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.59/110 11.11.2024/dk (LKSM-EMC and LKSM-EMC-SHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.19/107 11.11.2024/dk (LKMSM-HF and LKMSM-SHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.28/112 11.11.2024/dk (LKAM-HF and LKAM-SHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.23/108 11.11.2024/dk (LKM-FRHF and LKM-FRSHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.170/212 20.06.2024/dk (LKMM-FRHF and LKMM-FRSHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.24/109 11.11.2024/dk (LKSM-FRHF and LKSM-FRSHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.171/213 19.12.2024/dk (LKMSM-FRHF and LKMSM-FRSHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC849/116 11.11.2024/dk (LKSM-EMC-FRHF and LKSM-EMC-FRSHF2 0.6/1kV)
  • HELMACAB SPECIFICATION HBKQ 9.SPEC.60/113 11.11.2024/dk (LKAM-FRHF and LKAM-FRSHF2 0.6/1kV)

Remarks:
The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates
Type Approval certifies that a reppresentative sample of the products has been found to meet the applicable design criteria
Any modification of change shall not be valid until approval is granted by RINA as a result of due assessment.

Other Place of Manufacturing:
a) HELMACAB (SHANGHAI) Co., Ltd.
Plot 1-2 Minghan Expoert Processing Zone, Shanghai, 201401 P.R.C.

b) HELMACAB Oy
Lasitehtaankatu 12, FI-10960 Kanko, Finland.

Genova September 15, 2025
**** NOTICE: This is NOT an official certificate ****