MED210622CS!002ENGD- -  -  N- Saglan SO-R Vs -N- S- S- -20/05/2022- Marine Equipment- - SN- S- - N-  - 387,896B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED210622CS/002- N-May 19, 2027387896
 
Form
  Marine Equipment(TO)
Certification N. MED210622CS/002 - (ENG)
Certificate date 20/05/2022
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Item Nº MED/3.18a

Model or Denomin.
Items
Saglan SO-R Vs
Applicant SAGER AG
Place of requester DORNHUGELSTRASSE  %  CH-5724 Durrenasch  % SWITZERLAND
Tel. N.,Fax, Email 0041 62 7678746, 0041 62767838, christoph.hablasch@sager.ch
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 19/05/2022
Expire date 19/05/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED210622CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.18a
Description Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Type Saglan SO-R Vs
Applicant SAGER AG
DORNHUGELSTRASSE,CH-5724 Durrenasch,SWITZERLAND
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
May 20, 2022
May 19, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED210622CS/002
Page 1 of 3

Product description



Veil of glass fiber named SHS 75/4 having mass per area of 75 g/m2 and thickness 0,70 mm bonded by effect of 5,6 g/m2 of resin to glass wool support having density greater than 15 kg/m3 .
The possible variants are as described in the table below.
  • Thickness range (mm) from 10 to 120
  • Nominal density range (kg/m3) from 15 to 100 ± 10 %


Product
Sea
Offshore
Delivery form - plate
Coating Aluminium
Density glass wool*
Field of application
Saglan SO-R Vs SL 7
SO
-R
Vs
SL
7
Saglan SO-R Vs L 7
SO
-R
Vs
L
7
Saglan SO-R Vs ML 7
SO
-R
Vs
ML
7
Saglan SO-R Vs M 7
SO
-R
Vs
M
7
Saglan SO-R Vs MP 3
SO
-R
Vs
MP
3
Saglan SO-R Vs MH 3
SO
-R
Vs
MH
3

* SL= super light (15 kg/m3) HR= heavier (60 kg/m3) comfort = 7 L= light (20 kg/m3) VH= very heavy (80 kg/m3) acoustic = 3
ML= medium light (25 kg/m3) EH= extra heavy (100 kg/m3)
M= medium (30 kg/m3) H= heavy (50 kg/m3)
MP=medium plus (35 kg/m3)
MH= medium heavy (40 kg/m3)




ATTACHMENT TO
CERTIFICATE Nr. MED132617CS/002
Page 2 of 3



Field of application

As finishing material for all exposed interior and concealed or inaccessible surfaces.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.
Tests carried out

Tests as per RINA Test Laboratory reports Nos. 2017CS011326/1 and 2017CS011326/3 dated 24 May 2017 issued according to:
  • IMO 2010 FTP Code Part 5;
  • ISO 1716: 2010.




ATTACHMENT TO
CERTIFICATE No. MED210622CS/002
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****