MED333225WSENG- -  -  N- ERB-GAS-MP -N- S- S- -26/03/2026- Marine Equipment- - SN- S- - N-  - 2,346,787B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED333225WS- N-Mar 25, 20312346787
 
Form
  Marine Equipment(TO)
Certification N. MED333225WS - (ENG)
Certificate date 26/03/2026
Type Protezione antincendio
Product Sistemi fissi per la rilevazione di gas e idrocarburi
Item Nº MED/3.65

Model or Denomin.
Items
ERB-GAS-MP
Applicant Nanjing Zehai Marine Electric Equipment Co., Ltd.
Place of requester Room 501-A, No.5 Building, Liandong U Valley No.10 Xinfeng Road, Jiangning, Economic Development Zon Nanjing (Jiangsu)  % CHINA
Tel. N.,Fax, Email 15952005909, ---,sansuijbl@126.com
Directive (EU) 2025/1533
Standards IMO MSC.1/Circ.1370, EN IEC 60079-0:2018 incl. AC:2020, EN 60079-29-1:2016, IEC 60092-504:2016, IEC 60533:2015.
Reference Documents SOLAS 74 Reg. II-2/4, IMO Res. MSC.98(73)-(FSS Code) 16, IMO MSC.1/Circ.1370, IMO MSC.1/Circ.1527.
Expire date 25/03/2031
Responsible Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED333225WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.65
Description Fixed hydrocarbon gas detection system
Type ERB-GAS-MP
Applicant Nanjing Zehai Marine Electric Equipment Co., Ltd.
Room 501-A, No.5 Building, Liandong U Valley No.10 Xinfeng Road, Jiangning, Economic Development Zon Nanjing (Jiangsu),CHINA
Testing standards IMO MSC.1/Circ.1370, EN IEC 60079-0:2018 incl. AC:2020, EN 60079-29-1:2016, IEC 60092-504:2016, IEC 60533:2015.
Reference standards SOLAS 74 Reg. II-2/4, IMO Res. MSC.98(73)-(FSS Code) 16, IMO MSC.1/Circ.1370, IMO MSC.1/Circ.1527.
Issued in SHANGHAI on
This Certificate is valid until
March 26, 2026
March 25, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Zhi Yuan Tan
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED333225WS
Page 1 of 3
1. Product Description

The ERB-GAS-MP is a Gas Detection System designed to monitoring the leakage of combustible gas on board (in the cargo area and E/R, ACCOM. area in LNG tanker etc), covers the following main components:

1.1 Control Panel (MODEL: ERB-GAS-MP-M):

Power supply: AC 220V, 50/60Hz

Structure: Wall mounting type


Main Compositions: Touch screen, Control unit, Communication convert card
IP degree: IP 44

1.2 Sampling Panel (MODEL: ERB-GAS-MP-S):
Measuring gas: Combustible gas (HC),Oxygen(O2)
Measuring range: 0-100% LEL(HC), 0~25%VOL(O2)
Sampling type: Scanning type continuously
Power supply: AC 220V, 50/60Hz (From control panel)
IP degree: IP 44

1.3. Repeater panel (MODEL: ERB-GAS-MP-RP):
Power supply: DC 24V
Structure: console mounting type
IP degree: IP 44





 




ATTACHMENT TO
CERTIFICATE No. MED333225WS
Page 2 of 3

1.4: Detectors:
GTD-2000Tx : Oxygen detector head, Certified by MED MB900313, Ex db IIC T4/T6 Gb
GTD-2000Ex: Flammable gas detector head, Certified by MED MB900313, Ex db IIC T4/T5/T6 Gb
GIR-3000: Flammable gas detector head, Certified by MED MB900313, Ex db IIC T4/T6 Gb
Sensepoint XCD(O2): Oxygen detector, Certified by MED MB138125, Ex db IIC T5/T6 Gb
Sensepoint XCD(FL): Flammable gas detector, Certified by MED MB138125, Ex db IIC T5/T6 Gb
Sensepoint XCD FL-IR: Flammable gas detector, Certified by MED MB206423, Ex db IIC T5/T6 Gb


2. Application/Limitation
The gas detection system designed to detects and monitors the combustible gas at the hazardous area, pump room, water ballast tank, engine room, accommodation area, cargo motor room and BOG pip duct in ships.
This certificate only covers hardware listed under product description. All changes in software are to be recorded as long as he system is used on board. Documentation of major changers is to be forwarded to us for evaluation before implemented on board.
Salt mist test is not carried out, the equipment is not to be installed in weather exposed areas. Otherwise, relevant individual test report or valid certificates are to be provided when installed on board.
3. Design Assessment
The design assessment is based on SOLAS 74 Reg. II-2/4, IMO Res. MSC.98(73)-(FSS Code) 16, IMO MSC.1/Circ.1370, IMO MSC.1/Circ.1527.

4. Tests Carried Out

The test report, including environment test, EMC test and performance test, complies with EN 50104:2019,


EN IEC 60079-0:2018 incl. AC:2020, EN 60079-29-1:2016, IEC 60092-504:2016, and IEC 60533:2015. For
combined O2/HC systems,additionally: IMO MSC.1/Circ. 1370. Tests were conducted in authorized
laboratory and comply with these standards. Reports are filed by RINA with drawing No.: SHEL-28767.
Inspection report (Date on 2025, Julyl 8) edit by "NANJING ZEHAI MARINE ELECTRIC EQUIPMENT CO., LTD" and witnessed by RINA Surveyor. Filed by RINA with drawing SHEL-28760.
5. Reference Documents
Analysis and assessment of risk, Filed by RINA with drawing No. SHEL-28764.
European Representative Authorization Letter. Filed by RINA with drawing No.SHEL-28759.
Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-28765.
Technical drawings and manuals approved and filed by RINA listed on Approval letter No.:
SHEL/2026/318/JY001.

6. Marking of Product

The product is to be indelibly marked with name and address of the manufacturer, type designation, batch or serial number or other elements allowing their identification and the MED Mark of Conformity.





ATTACHMENT TO
CERTIFICATE No. MED333225WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Zhi Yuan Tan
**** NOTICE: This is NOT an official certificate ****