MED273826CS!001ENG- -  -  N- A Class - Aluminum deck - Steel Equivalent -N- S- S- -11/05/2026- Marine Equipment- - SN- S- - N-  - 704,840B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED273826CS/001- N-May 10, 2031704840
 
Form
  Marine Equipment(TO)
Certification N. MED273826CS/001 - (ENG)
Certificate date 11/05/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
A Class - Aluminum deck - Steel Equivalent
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
Place of requester BORMSTRAAT 24  %  2830 Tisselt  % BELGIUM
Tel. N.,Fax, Email +32 15 71 82 70, ---, invoices.be@etexgroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference Documents SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616,IMO Circ. MSC.1 1621
Request 27/04/2026
Expire date 10/05/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED273826CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type A Class - Aluminum deck - Steel Equivalent
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
BORMSTRAAT 24,2830 Tisselt,BELGIUM
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1435
Reference standards SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616; IMO Circ. MSC.1 1621
Issued in Genoa on
This Certificate is valid until
May 11, 2026
May 10, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED273826CS/001
Page 1 of 2

Product description

The deck consists of 4 mm thick aluminum sheet metal and “L”-shaped stiffeners having dimensions according to FTP-Code, spaced every 600 mm. The insulation material, known as Dalfratherm 1260 ULS, is 50 mm thick and has a density of 128 kg/m³. On the side of the deck with stiffeners, which is exposed to fire, a layer of the insulation described above is provided, resting on top of the stiffeners and secured to the deck sheet metal using aluminum pins spaced having pitch from 100 mm to 500 mm. The insulation material is positioned perpendicular to the deck stiffeners; additionally, transverse joints are also present.
Field of application
Fire resisting A-30 Class aluminium deck with fire hazard on the side fitted with the insulating material.
The certified item is not in compliance with the requirement of Fire Test Procedure Code Part 3 regarding the plate thickness and this characteristic must be taken into account.

The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.
Reference documents
Promat drawings No. R33 DAM 26 Rev. 01 dated 08/05/2026 enclosed to Test Report No. 2026CS012738/1 issued on 11/05/2026; and Rina document No. REP-2025DP01508-H1-Rev.0 - Genoa, 17 October 2025 Proposal for STEEL EQUIVALENT made by INSULATED ALUMINIUM on yachts in compliance with REG A
Tests carried out
Tests as per RINA Test Laboratory report No. 2026CS012738/1 issued on 11/05/2026. according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED273826CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****