PQA143925GE!001ENGB- -  -  N- ARGOMETER AL.10,ARGOMETER SC.01,RA.01 -N- S- S- -09/12/2025- Prodotti Elettrici- - SN- N- - N-  - 224,115BbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- PQA143925GE/001- N-224115
 
Form
  Prodotti Elettrici(TO)
PQA143925GE/001
Certification N. PQA143925GE/001 - (ENG)
Certificate date 09/12/2025
Type Impianti Elettrici
Product ..

Model or Denomin.
Items
ARGOMETER AL.10,ARGOMETER SC.01,RA.01
Applicant ARVIGO S.R.L.
Place of requester PIAZZA ZAGORA 3R  %  16155 Genova (GE)  % ITALY
Tel. N.,Fax, Email 010 506181, 010 5185819, INFO@ARVIGO.IT
Standards
Responsible Office RINA Genoa Marine
Production Quality Assurance Certificate ENG
Vuoto Querysave
S
Production Quality Assurance Certificate
No. PQA143925GE
This is to certify that RINAdid undertake the examination of the equipment identified below with the criteria for the Production Quality Assurance set-up in the “Rules for Testing and Certification of Marine Materials and Equipment”.

Description ..
Type ARGOMETER AL.10
ARGOMETER SC.01
RA.01

Applicant ARVIGO S.R.L.
PIAZZA ZAGORA 3R
16155 Genova (GE)
ITALY
Reference standards RINA Rules for the Classification of Ships Part C, - Machinery , Systems and Fire Protection - Ch. 3,Sect. 8,Tab. 1
  

 
 
Issued in RINA Genoa Marine on December 9, 2025.    
_________________________________
RINA Services S.p.A.
Mattia Dreossi
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

PQA143925GE
Steering angle converter type Argometer RA.01

Main features:
Resistance to Voltage converter for driving up to 10 indicating instruments (full scale range ±1Vdc)
Input: Potentiometer: 1 to 5 kOhm
Output: ±1V (100 ohm 10mA); 4-20mA (max 400 ohm load)
Zero - Span trimming on the front panel.
Temperature: -20°C to +70°C
Warnings: power supply failure (free voltage contact)
Power supply: 24Vdc +30% -25% ; 1W

Follow-Up Steering gear control module type ARGOMETER SC.01

Main features:
Microprocessor based controller with configurable parameters:
Inputs:
Spade Rudder potentiometer: 1 to 5 kOhm (linear)
Helm Control potentiometer: 1 to 5 kOhm (linear)
Alternative input: +/- 10Vdc
24 Vdc signal for valve control inhibit
Outputs:
Rudder angle position: +/- 1V ; +/-5V; (10mA max); isolated 4-20 mA
Valve control relay outputs: 24Vdc
Proportional controls: +/-10Vdc ( max load 100 Ohm)
RS485 / NMEA protocol for V.D.R.
Service interface for full set-up and configuration: RS232

Warnings / Alarms:
Power supply failure + watch-dog; (free voltage contact)
Low insulation (power supply and I/O) and LED signalling (free contact)
Potentiometers failure and LED signalling (free contact)
Control Relay failure and LED signalling (free contact)
Feedback / Helm Control mismatch (free contact)
Rudder low speed (free contact)

Power supply: 24Vdc +30 % -25%; 3 Watts
Control module front panel is additionally provided with:
Trimming for Zero-Span control Input
Trimming for Zero-Span feedback rudder position
Dead band control

Alarm Module type AL.10

Main features:
Configurable ISA alarm sequence
Input: up to 10 isolated (*) N.C./N.O.
isolated, duplicated ack., reset, test lights push buttons
Output: 10 +10 isolated outputs(*) (optical signalling 24Vdc , 0,6 W max)
1 + 1 isolated outputs (acoustical signalling 24Vdc, 12 W max)
Alarm module is provided with two panels; each panel includes :
- 10 alarm LED
- 1 power supply status LED
- 1 failure LED
- 1 Buzzer
- Acknowledge, Reset, Test Lights & Buzzer push buttons

Warnings / alarms:
Power supply failure and watch dog
(*) isolation is provided for each I/O channel
Power supply : 24 Vdc +30% -25% (45 mA max)

 
**** NOTICE: This is NOT an official certificate ****