MED405026CSENGB- -  -  N-  SOMEC FRP W 021 -N- S- S- -15/07/2026- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED405026CS- N-Jul 14, 2031162855
 
Form
  Marine Equipment(TO)
MED405026CS
Certification N. MED405026CS - (ENG)
Certificate date 15/07/2026
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
SOMEC FRP W 021
Applicant SOMEC S.P.A.
Place of requester VIA PALÙ 30  %  31020 San Vendemiano (TV)  % ITALY
Tel. N.,Fax, Email +390438471904, +390438471800, info@somecgroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/9,IMO Res. MSC.5(48)-(IGC Code) 3,IMO MSC/Circ.1120
Request 23/06/2026
Expire date 14/07/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED405026CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type SOMEC FRP W 021
Applicant SOMEC S.P.A.
VIA PALÙ 30,31020 San Vendemiano (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/9; IMO Res. MSC.5(48)-(IGC Code) 3; IMO MSC/Circ.1120
Issued in Genoa on
This Certificate is valid until
July 15, 2026
July 14, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED405026CS
Page 1 of 2

Product description

Window, with central mullion, having maximum overall clear size of 1010x1210 mm (WxH). The maximum clear light of each window is 470x1210 mm (WxH) The glass compound, moving from the exposed side, is composed of a toughened pane having minimum thickness of 6 mm (manufacturer Somec), a cavity 9 mm deep, a toughened pane having minimum thickness of 6 mm (manufacturer Vetrotech Saint-Gobain), a PVB layer having thickness of 1.52 mm and a glass type PYROSWISS having minimum thickness of 10 mm (manufacturer Vetrotech Saint-Gobain). The frame is composed of a steel profile having depth of 112 mm and thickness of 14.5 mm, fillet welded on both sides to the bulkhead, to which is fixed a glass retaining stainless steel flat, 6 mm thick and having width of 40 mm. The central mullion is composed of a steel flat, 25 mm thick welded to a square pipe having thickness of 5 mm and dimensions of 70x50 mm and a glass retaining frame composed of a stainless steel flat having width of 70 mm and thickness of 6 mm. The glass retaining frames, fitted on the side exposed to the fire, are fixed to the frame and to the mullion by means of M6 screws fitted with pitch of 75 mm. Between the glass faces, the frame and the glass retaining flat, gaskets of KERAFIX FLEXLIT, 5 mm thick, are fitted. Between the glass edges and the frame, on the lower side, spacers of calcium silicate type FIRESIL, are fitted. The glass panes are sealed by means of silicone type PENSIL 300 BLACK.
Field of application
Fire resistant A-0 Class window with fire hazard on the inner side of the application and on the side fitted with the toughened pane.
Reference documents
SOMEC drawing No. SD1-01-02 dated 26 May 2006 (5 sheets) approved on 26 July 2016 with endorsement No. LABS-1323.
Tests carried out
Tests as per RINA Test Laboratory report No. 2016CS012326/2 issued on 26 July 2016 according to IMO 2010 FTP Code Part. 3 - Appendix 2 - A.I.




ATTACHMENT TO
CERTIFICATE No. MED405026CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****