MED119926CS!004ENG- -  -  N- MI-B15 CEILING WITH CABLE PENETRATION - METALLIC WET UNIT - A30 CLASS D. P. -N- S- S- -09/03/2026- Marine Equipment- - SN- S- - N-  - 2,370,495B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED119926CS/004- N-Mar 8, 20312370495
 
Form
  Marine Equipment(TO)
Certification N. MED119926CS/004 - (ENG)
Certificate date 09/03/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
MI-B15 CEILING WITH CABLE PENETRATION - METALLIC WET UNIT - A30 CLASS D. P.
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standards IMO MSC.1/Circ.1435,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616, IMO MSC.1/Circ.1621
Expire date 08/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED119926CS/004

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type MI-B15 CEILING WITH CABLE PENETRATION - METALLIC WET UNIT - A30 CLASS D. P.
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO MSC.1/Circ.1435,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616, IMO MSC.1/Circ.1621
Issued in Genoa on
This Certificate is valid until
March 9, 2026
March 8, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED119926CS/004
Page 1 of 2

Product description,

Membrane protection of the steel deck structural core performed, 400 mm below the deck plating, by a ceiling certified by RINA, on B-15 Class, with Certificate No. MED119926CS/003 that may be fitted with the following accessories:
  • 9 mm electrical cable passing through the Rockwool Searox SL470 mineral wool insulation, 35 mm thick and with a density of 180 kg/m3, through a 25 mm diameter hole. The flame, the cable is externally insulated for 8 mm with 26/27 mm of flame-retardant silicone such as "SIKA Firestop Marine" certified for limited flame spread and with 8/9 mm of flame-retardant silicone such as "SIKA Firesil Marine" certified for limited flame spread;
  • 12 mm electrical cable passing through the Rockwool Searox SL470 mineral wool insulation, 35 mm thick and with a density of 180 kg/m3, through a 30 mm diameter hole. The cable is externally insulated for 9 mm with 26/27 mm of flame-retardant silicone such as "SIKA Firestop Marine" certified for limited flame spread and with 8/9 mm of flame-retardant silicone such as "SIKA Firesil Marine" certified for limited flame spread;

Field of application
Fire resisting A-30 Class deck.
Reference documents
Marine Interiors Cabins SpA drawing no. +24PC00572 rev.01 dated 08/01/2026.
Tests carried out
Tests as per RINA Test Laboratory report No. 2026CS011199/1 dated 20/02/2026 according to IMO 2010 FTP Code.




ATTACHMENT TO
CERTIFICATE No. MED119926CS/004
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****