Single leaf hinged door whose maximum clear opening size is 1890 mm high and 900 mm wide. The door leaf, with maximum dimensions 1970 mm high and 980 mm wide and thickness 116 mm, is composed, starting from the side with the hinges unexposed to the fire, of a 4 mm thick carbon steel plate, an insulation package consisting of two layers of material type PROMAGUARD, 10 and 6 mm thick and having density of 240 kg/m3 fixed to the carbon steel sheet having thickness of 2 mm by means of steel pins and washers welded with density of 12 per m2. On the 4 mm sheet of the leaf, the following stiffeners are provided: 2 vertical stiffeners having a pitch of 300 mm and 3 horizontal stiffeners with a ranging pitch from 426 to 666 mm, made of a “T” shaped carbon steel profile having dimensions of 40x40x6 mm; the coupling of the outer sheet with the inner sheet is achieved by means of stainless-steel screws M5 having a ranging pitch from 335 to 562 mm. The door frame consists of an “L” shaped carbon steel profile having dimensions of 100 × 75 mm with a thickness of 7 mm, fixed to the aluminum bulkhead by No. 38 M16 stainless-steel bolts with a ranging pitch from 99 to 357 mm. The frame is insulated on both sides, for a width of 85 mm, with 2 layers of mineral wool Rockwool type SeaRox SL620, thickness 30 mm and density 100 kg/m³, fixed with pins and washers. Between frame and aluminium bulkhead is provided a corde of sealant Sika type Firestop Marine in correspondence of the bolts and a layer of intumescent gasket PROMAT type PROMASEAL-PL having thickness of 2.5 mm and width of 15 mm. On the rebate of the door between leaf and frame is provided 1 layer of intumescent gasket PROMAT type PROMASEAL-PL having thickness of 2.5 mm and width of 15 mm. The closure is made tight with an EPDM gasket UNIGUM type SPS040T having dimensions of 30x20 mm type fitted in the bended edge on the rabbet which is shielded with 2 thermo-expanding gaskets PROMAT type PROMASEAL-PL having thickness of 2.5 mm and width of 15 mm fitted on exposed to the fire perimetric door edge. The leaf is equipped with two hinges and a wedge closing system that acts on 8 steel poles by means of a removable handle on both sides.
Field of application
Fire resistant A-60 Class single leaf hinged door intended for general applications, installed on an aluminium bulkhead, in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested;
- door used with a fire tested frame design.
Reference documents
Meccanica Mariani drawings No. B-6374-900-147_LL_TEST(A60) dated 31/10/2025 reported on Test as per RINA Fire Protection Laboratory report No. 2025CS014952/3 issued on 17 June 2026.
Tests carried out
Test as per RINA Fire Protection Laboratory report No. 2025CS014952/3 issued on 17 June 2026 according to IMO 2010 FTP Code Part 3. |