MED516425CSENGF- -  -  N- CALM -N- S- S- -01/12/2025- Marine Equipment- - SN- S- - N-  - 457,713B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED516425CS- N-Sep 23, 2028457713
 
Form
  Marine Equipment(TO)
MED053626GE/002,MED040126GE/004,MED040126GE/005,MED040126GE/006
Certification N. MED516425CS - (ENG)
Certificate date 01/12/2025
Type Mezzi di salvataggio
Product Embarkation ladders
Item Nº MED/1.29
USCG Category N° 160.117

Model or Denomin.
Items
CALM
Applicant F.LLI SANGIACOMO S.N.C. DI SANGIACOMO LORENZO & C.
Place of requester LOCALITA' PRODONNO 25  %  16017 Isola Del Cantone (GE)  % ITALY
Tel. N.,Fax, Email 010 9636133, 010 9636133, ---
Directive (EU) 2025/1533
Standards IMO Res.MSC.81(70), as amended,ISO 5489:2008.
Reference Documents SOLAS 74 Reg. III/11, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code), IMO Res.MSC.48(66)-(LSA Code) I, MSC.48(66)-(LSA Code) VI IMO Res.MSC.97(73)-(2000 HSC Code), IMO MSC.1/Circ.1285.
Request 20/10/2025
Expire date 23/09/2028
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Davide Campora S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED516425CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.29
USCG Category Nº 160.117
Description Embarkation ladders
Type CALM
Applicant F.LLI SANGIACOMO S.N.C. DI SANGIACOMO LORENZO & C.
LOCALITA' PRODONNO 25,16017 Isola Del Cantone (GE),ITALY
Testing standards IMO Res.MSC.81(70), as amended,ISO 5489:2008.
Reference standards SOLAS 74 Reg. III/11, SOLAS 74 Reg. III/34, IMO Res.MSC.36(63)-(1994 HSC Code), IMO Res.MSC.48(66)-(LSA Code) I, MSC.48(66)-(LSA Code) VI IMO Res.MSC.97(73)-(2000 HSC Code), IMO MSC.1/Circ.1285.
Issued in Genoa on
This Certificate is valid until
December 1, 2025
September 23, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Fabio Morbioni
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED516425CS
Page 1 of 2

Product description

Embarkation ladder with the following main components:

Bridge wood step: Lenght: (525 ± 2) mm - Breadth: (115±2) mm - Height : (57±2) mm, n° 4 holes Ø25 (±1) mm;

Flat wood step: Lenght: (525±2) mm - Breadth: (115±2) mm - Height: (28±1) mm, n° 4 holes Ø25 (±1) mm;

Rope diameter: Ø 20 mm.


Reference document

Embarkation ladder drawing issued by F.lli Sangiacomo and approved by RINA with n° CSST 13043;

Datasheet side rope, issued by Minetti Srl and filed by RINA with n° CSST 13096.

Tests carried out

Report n°2010CS012160 issued by RINA according to ISO 5489:2008 and filed with n° CSST 6258;

Tests report No.198/15 issued by Armando Rapetti Srl, witnessed and filed by RINA with n° CSST 13051.


Remarks

The bottom of at least two step of the ladder shall be marked as per ISO 5489:2008 Par 7.1.

The bottom of each replacement step shall be marked as per ISO 5489:2008 Par 7.2.

A ladder shall not include more than two replacement steps.





ATTACHMENT TO
CERTIFICATE No. MED516425CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Fabio Morbioni
**** NOTICE: This is NOT an official certificate ****