MED128726CSENGD- -  -  N- PORTA SINGOLA A BATTENTE DM06A_DB_1 DENOMINATA TFA60-ALB -N- S- S- -24/02/2026- Marine Equipment- - SN- S- - N-  - 1,152,230B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED128726CS- N-Feb 23, 20311152230
 
Form
  Marine Equipment(TO)
Certification N. MED128726CS - (ENG)
Certificate date 24/02/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
PORTA SINGOLA A BATTENTE DM06A_DB_1 DENOMINATA TFA60-ALB
Applicant MBM GROUP S.R.L.
Place of requester Via Rovereto 4  %  31010 Mareno Di Piave (TV)  % ITALY
Tel. N.,Fax, Email 0422881716; cristiano.dantoni@mbmgroup.it
Directive (EU) 2025/1533
Standards IMO MSC.1/Circ.1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511/Rev.1
Request 19/02/2026
Expire date 23/02/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED128726CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type PORTA SINGOLA A BATTENTE DM06A_DB_1 DENOMINATA TFA60-ALB
Applicant MBM GROUP S.R.L.
Via Rovereto 4,31010 Mareno Di Piave (TV),ITALY
Testing standards IMO MSC.1/Circ.1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511/Rev.1
Issued in Genoa on
This Certificate is valid until
February 24, 2026
February 23, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED128726CS
Page 1 of 2

Product description

Single leaf hinged door whose maximum clear opening size is 1200 mm (W) and 2200 mm (H). The leaf, having maximum dimensions of 1242 mm in width, 2217 mm in height and thickness of 58.4 mm, is composed of two steel sheets, 1.2 mm thick each and, in between, the insulating material. Such material is composed of two layers of an insulating material named PROMATECT H, 8 mm thick and having density of 870 kg/m3 and, in between, a layer of mineral wool, 40 mm thick and having density of 145 kg/m3 named SEAROX SL 440. The door is fixed to a bulkhead certified as “A-60 lightweight bulkhead” (certificate Bureau Veritas N. 76580/A1 MED dated 12/02/2025). The door frame, having height of 2613 mm and composed of a steel profile, 4 mm thick and having dimensions of 29x69 mm, is welded to L shaped steel profiles having the same thickness and width of 20 mm (bolted to the bulkhead with pitch of 600 mm) and is bolted to a steel profile, 2 mm thick, fixed to the bulkhead.

The Door may also be produced by:
MBM GROUP SRL Via Rovereto, 4 31010 Mareno di Piave (TV)
Field of application
Fire resistant A-60 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows
- maximum door size tested
- door used with a fire tested frame design.
Reference documents
OFFICINE DEL BELLO drawing No. PTI_11_PTF_A60_1-SBA Rev. 3 dated 4 October 2013 approved on 3 December 2013 with endorsement No. LABS-857.
Tests carried out
Test as per RINA Test Laboratory report No. 2013CS012710/3 issued on 3 December 2013 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED128726CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****