ENGGS16/04/2010
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED057010WS
Certificate date 4/16/10
Type Mezzi di salvataggio
Directive 2008/67/EC
Product Launching appliances using fall (davits)
Item Nº A.1/1.21
Model 21 Kn / 6 m
Identification HT 751
Manufacturer WUXI HAITIAN MARINE EQUIPMENT CO., LTD.
Tel. N.,Fax, Email +86 510 8326 1373, +86 510 8326 0596, htmarine@163.com
Place of production NO.7-1 TIANSHI ROAD, SHITANGWAN TOWN  %  214185 WUXI  % CHINA
Tel. N.,Fax, Email +86 510 8326 1373, +86 510 8326 0596, htmarine@163.com
Applicant WUXI HAITIAN MARINE EQUIPMENT CO., LTD.
Place of requester NO.7-1 TIANSHI ROAD, SHITANGWAN TOWN  %  214185 WUXI  % CHINA
Tel. N.,Fax, Email +86 510 8326 1373, +86 510 8326 0596, htmarine@163.com
Standards IMO Res. MSC 81(70)
Surveyor Kai Yan
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED057010WS

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21
Description Launching appliances using fall (davits)
Model 21 Kn / 6 m
Identification HT 751
Applicant WUXI HAITIAN MARINE EQUIPMENT CO., LTD.
NO.7-1 TIANSHI ROAD, SHITANGWAN TOWN
214185 WUXI
CHINA
Testing standards IMO Res. MSC 81(70)
    
Issued at Genoa 
on April 16, 2010

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /10
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED057010WS
Manufacturer:
WUXI HAITIAN MARINE EQUIPMENT CO., LTD.
Address
NO.7-1 TIANSHI ROAD, SHITANGWAN TOWN
214185 WUXI
CHINA

Verified components of the equipment (with serial number)
HT 751
Technical documentation
Test report issued by RINA on 2nd Apr. 2010 in accordance with Resolution MSC. 81(70) and MSC.48(66) LSA Code

RINA approved drawing as followings:
 SHST-4722            02/04/2010            2T/10M SINGLE ARM BOAT/LUFFING CRANE-248HT50.00.00

Description:     
  Type: 21KN/6m
  Safety working Load: 21 kn.
  Maximum lowering load: 21KN
  Maximum hoisting load: 14KN   
  Slewing Radius: 6.0 meter
  Hoisting speed: ≥18m/min
  Lowering speed: ≥36m/min
  Slewing angle of electric motor: ≤360 deg
  Slewing angle of accumulator: ≥110 deg
  Steel wire dimension: 14mm
  Type of hydraulic winch: IYH34-11000D60221
  Hydraulic system working pressure: 13Mpa

Limitation on the acceptance or use of the product
Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****