DIP083624XTENGB- -  -  N- 400 x 400 mm - 600 x 600 mm - 800 x 800 mm -N- S- S- -04/07/2024- Prodotti per nautica diporto- - NN- N- - N-  - 166,397BbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP083624XT- N-Mar 16, 2027166397
 
Form
  Prodotti per nautica diporto(TO)
DIP083624XT
Certification N. DIP083624XT - (ENG)
Certificate date 04/07/2024
Product Boccaportelli stagni

Model or Denomin.
Items
400 x 400 mm - 600 x 600 mm - 800 x 800 mm
Applicant BOFOR DENIZCILIK SANAYI VE TICARET LTD.STI.
Place of requester AYDINLI BIRLIK OSB MAH., BATI CAD., NO.28 34953 TUZLA, ISTANBUL  % TURKEY
Tel. N.,Fax, Email +90 216 466 4619, +90 216 466 4621, ---
Directive NONE
Standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
Expire date 16/03/2027
Head Office ISTANBUL
TYPE APPROVAL CERTIFICATE MATERIALI ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. DIP083624XT
This is to certifythat the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Description Watertight hatches
Type 400 x 400 mm - 600 x 600 mm - 800 x 800 mm
Reference standards Rules for the Classification of Yachts designed for Commercial Use, Rules for the Classification of Pleasure Yachts
  

 
 




   .   This Certificate is valid until March 16, 2027
_________________________________
RINA Services S.p.A.
Alper Tek
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
DIP083624XT
Allegato - Pagina 1/1
400 x 400 mm - 600 x 600 mm - 800 x 800 mm
Reference documents:
- Job nr. 2024/XT/01/836

Product Description:
- Watertight hatches: 400 x 400 mm; 600 x 600 mm; 800 x 800 mm.
- See drawings approved with nr. from ISDP-5577 to ISDP-5578.
- If the same construction materials, as per approved a.m. drawings, will be used, the T.A. may be considered suitable for all the dimensions so that: short side between 400 and 800 mm and long side between 400 and 800 mm.
- The hatches are to be hinged at the forward edge.
- After installation on board, a water jet test is to be carried out.
- The T.A. is relevant only to "watertightness".
- Hatches suitable for an hydraulic pressure of 2.0 m head.
- Hatches fitted on escape ways are to be operable by both sides (handles are to be permanently fixed).
- Hatches suitable for yachts designed for Commercial use having GT < 500 and fitted to compartments other than the category A machinery space and galley boundaries.
- Hatches suitable for pleasure yachts having any GT and fitted other than the category A machinery space and galley boundaries.
- Hatches suitable for pleasure yachts having GT<= 300.
Fields of application:
- Watertight hatches for "RINA Rules for the Classification of Yachts designed for Commercial Use" and "RINA Rules for the Classification of Pleasure Yachts".

 05.07.2024
**** NOTICE: This is NOT an official certificate ****