FAB032524CFENG- -  -  N- Grades 304, 304L,316,316L,321,321H,347,347H,316Ti, UNS S31803/S32205, UNS S31500, UNS S32750 -N- S- S- -20/09/2024- Fabbricanti Approvati- - SN- N- - S-  - 1,241,598BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB032524CF- N-Jul 8, 20291241598
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB032524CF - (ENG)
Certificate date 20/09/2024
Type Approvazione di fabbricanti di materiali
Product Tubi non saldati in acciaio austenitico ed in acciaio austeno-ferritico (duplex)

Model or Denomin.
Items
Grades 304, 304L,316,316L,321,321H,347,347H,316Ti, UNS S31803/S32205, UNS S31500, UNS S32750
Applicant TUBACEX TUBES AND PIPES PRIVATE LIMITED
Place of requester SURVEY NO. 131/1, UMBERGAON-SANJAN ROAD,  UMBERGAON  %  396171 Umbergaon (Gujarat-24)  % INDIA
Tel. N.,Fax, Email +91-7802980234, ---, customer_approval@tubacexindia.com
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents RINA Rules
Expire date 08/07/2029
Responsible Office RINA India Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB032524CF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Seamless steel tubes and pipes in austenitic and austenitic-ferritic (duplex) stainless steel
Type Grades 304, 304L,316,316L,321,321H,347,347H,316Ti, UNS S31803/S32205, UNS
S31500, UNS S32750

Applicant TUBACEX TUBES AND PIPES PRIVATE LIMITED
SURVEY NO. 131/1, UMBERGAON-SANJAN ROAD, UMBERGAON
396171 Umbergaon (Gujarat-24)
INDIA
Reference standards RINA Rules for the approval of manufacturers of materials
Reference documents RINA Rules
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until July 8, 2029
_________________________________
RINA Services S.p.A.
Aswin Palliath
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB032524CF
Enclosure - Page 1 of 1
Grades 304, 304L,316,316L,321,321H,347,347H,316Ti, UNS S31803/S32205, UNS S31500, UNS S32750

APPROVAL CONDITIONS



Size range
Outside diameter: Min. 6 mm to Max. 219 mm
Wall Thickness: Min. 1 mm to Max. 12.70 mm


Manufacturing process :
Hollow pipes made by Hot Piercing from round bars and cold finish pipes & tubes by Cold drawing/Cold Pilgering.

Heat treatment :
Solution Annealing to minimum temperatures as below for various grades and quenching by cooling rapidly with water or Air
Grades Minimum Temperature
304, 304 L, 316, 316 L, 321, 321H, 347, 347H &316Ti 1040 deg. C
UNS S31803/S32205, UNS S31500 &UNS S32750 1100 deg. C

Survey conditions:
The pipes are to be in compliance in all respects with the requirements specified in Part D, Ch 2, Sec 2 of the RINA Rules and are to be tested accordingly.

Raw material to be provided by RINA approved manufacturer


General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.


RINA India Marine 20-09-2024
**** NOTICE: This is NOT an official certificate ****