| P101 RFOU/TFOU / E/M, P105 BFOU / E/M,P110 BU / E/M, P111 RU/TU / E/M, P118 BFOU-HCF / E/M, ,P119 RX/TX, RFCU/TFCU / E/M, BFCU / E/M, BFCU-HCF / E/M,P108 UX / E/M |
1. Production Description:
+ 0.6/1kV Shipboard Power Cable with Following Rating:
Type | Rated Voltage (kV) | Number of Core | Conductor Cross-section
(mm2) | Max. Temp.
(℃) |
P101 RFOU/TFOU / E/M,
P105 BFOU / E/M,
P110 BU / E/M,
P111 RU/TU / E/M
P118 BFOU-HCF / E/M,
P119 RX/TX,
RFCU/TFCU / E/M,
BFCU / E/M,
BFCU-HCF / E/M | 0.6/1 | 1/2 | 1-630 | 90 |
2+1 / 2+E | (1-300)+(1-300) |
3 | 1-300 |
3+1 / 3+E | (1-300)+(1-300) |
4 | 1-300 |
4+1 / 4+E | (1-300)+(1-300) |
5 | 1-300 |
6-37 | 1.0,1.5,2.5,4 |
P108 UX / E/M, | 0.6/1 | 1 | 1-300 |
Note:
+ “Conductor Cross-section” is selected from the following series of conductor size:
1.0, 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70, 95, 120, 150, 185,240, 300, 400,500,630
+ “Number of core” is selected from the following series of core number:
1,2,3,4, 5, 6, 7, 8, 10, 12, 14, 15, 16,19, 20 ,24, 27, 30, 33, 37
+Meaning of The Code
R | EPR Insulation |
T | XLPE Insulation |
B | Fire -Resistant Cable |
F | Low-smoke, halogen-free polymer Inner Covering |
O | Tinned Copper Wire Braiding Armour |
C | Galvanized Steel Wire Braiding Armour |
X | Unarmored |
U | SHF2 Category a Sheath |
E | SHF2 Category b Sheath |
M | SHF2 Category c Sheath |
-HCF | HC(1100 C/Degree, the minimum fire resistance time is 30 minutes ) Fire -Resistant Power Cable |
TYPE APPROVAL CERTIFICATE
NO, ELE539925WS/006
Enclosure - Page 2 of 2
2. Reference Documents:
+ Specification of marine cables. Filed by RINA with drawing No. SHEL-29761.
+ Test Report: “Shanghai National center of testing and inspection for electric cabel and wire Co., Ltd.” Report No.: CT25-03995-2B1. Test Report: “Shanghai Intelligent Service and Technology Co., Ltd.” Report No.: TN25-5208E. Filed by RINA with drawing No. SHEL-29766.
+ Routine test Report and Narrative report signed by RINA Surveyor. Filed by RINA with drawing No. SHEL-29765.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-29753.
+ Manufacturer's information, Filed by RINA with drawing No. SHEL-29755.
3. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment. |
|