MED330123WS!001ENGD- -  -  N- ISO5489-S -L  -N- S- S- -25/06/2023- Marine Equipment- - SN- S- - N-  - 1,058,156B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED330123WS/001- N-Jun 24, 20281058156
 
Form
  Marine Equipment(TO)
Certification N. MED330123WS/001 - (ENG)
Certificate date 25/06/2023
Type Mezzi di salvataggio
Product Embarkation ladders
Item Nº MED/1.29

Model or Denomin.
Items
ISO5489-S  -L  
Applicant JIANGSU NEWLAND SHIP EQUIPMENT CO., LTD.
Place of requester Jiangyan Economic Development Zone, Jiangyan City, Jiangsu Province,CHINA
Tel. N.,Fax, Email 13285268026, +86 523 88060281, xdlmarine@163.com
Directive (EU) 2022/1157
Standards IMO Res.MSC.81(70), as amended,ISO 5489:2008.
Reference Documents Reg.III/4, III/11 and III/34 of SOLAS '74 Convention as amended,IMO Reg.MSC.48(66) - LSA Code, as amended,IMO MSC.1/Circ.1285,IMO MSC.1/Circ.1630.
Expire date 24/06/2028
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED330123WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.29
Description Embarkation ladders
Type ISO5489-S  -L  
Applicant JIANGSU NEWLAND SHIP EQUIPMENT CO., LTD.
Jiangyan Economic Development Zone, Jiangyan City, Jiangsu Province,CHINA
Testing standards IMO Res.MSC.81(70), as amended,ISO 5489:2008.
Reference standards Reg.III/4, III/11 and III/34 of SOLAS '74 Convention as amended; IMO Reg.MSC.48(66) - LSA Code, as amended; IMO MSC.1/Circ.1285; IMO MSC.1/Circ.1630.
Issued in SHANGHAI on
This Certificate is valid until
June 25, 2023
June 24, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED330123WS/001
Page 1 of 2
PRODUCT DESCRIPTION

- The embarkation ladder is assembled with two side ropes on each side continuous from the top of the ladder

to the bottom(Manila rope).

- Each step is supported by each side rope.

- Steps:

The four lowest steps are made of rubber material. LXBXH (525X115X28, at thinnest point) mm.

The remaining steps are made of hard wood. LXBXH (525X115X28, at thinnest point) mm.

- Each side rope has a breaking strength of at least 24 kN.


REFERENCE DOCUMENTS
Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-31127
EMBARKATION LADDER (SHST/2018/00657/LEIGU), SHST-47384 TEST REPORT for embarkation ladder (ISO5489 -
S - L) (SHST/2023/853/LEIGU), Application form SHST47377/ Analysis and assessment of risk SHST47383 / Unchanged
statement SHST47379 (SHST/2023/852/LEIGU).

TESTS CARRIED OUT
In accordance with IMO Resolution MSC.81(70) as amended and ISO 5489:2008, as per test report SHST-47384.


REMARKS
- Each ladder is to be marked in compliance with ISO 5489:2008, Par 7.

- Each replacement step is to be marked in compliance with ISO 5489:2008, Par 7.

Note

- Our review and approval is based on Original Prototype MED Module B issued by RINA, refer to Module B Certificate


MED072918WS/001 issued on June 25, 2018. As informed by manufacturer, initial condition is kept.
- The previous issued MED Module B Certificate No.:MED072918WS/001 which has expired is replaced accordingly.




ATTACHMENT TO
CERTIFICATE No. MED330123WS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****