MED129322CSENGD- -  -  N- EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR CABIN BALCONIES -N- S- S- -30/03/2022- Marine Equipment- - SN- S- - N-  - 491,066B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED129322CS- N-Mar 29, 2027491066
 
Form
  Marine Equipment(TO)
Certification N. MED129322CS - (ENG)
Certificate date 30/03/2022
Type Protezione antincendio
Product Nozzles for fixed pressure water-spraying fire-exstinguishing systems for cabin balconies
Item Nº MED/3.60

Model or Denomin.
Items
EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR CABIN BALCONIES
Applicant VALVITALIA S.P.A. - BUSINESS UNIT FIRE FIGHTING
Place of requester VIA MARIO NATALUCCI 6  %  60131 Ancona (AN)  % ITALY
Tel. N.,Fax, Email 3453666651, +39 071 2865099, fabrizio.raffaelli@valvitalia-fire.com
Directive (EU) 2021/1158
Standards IMO MSC.1/Circ.1268
Reference Documents Reg II-2/10 of SOLAS 74 as amended, IMO Res.MSC 98(73)-(FSS Code), IMO MSC.1/Circ.1313.
Request 04/01/2017
Expire date 29/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Giovanni Carratino S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED129322CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.60
Description Nozzles for fixed pressure water-spraying fire-exstinguishing systems for cabin balconies
Type EI-MIST FIXED PRESSURE-WATER SPRAYING FIRE EXTINGUISHING SYSTEMS FOR CABIN BALCONIES
Applicant VALVITALIA S.P.A. - BUSINESS UNIT FIRE FIGHTING
VIA MARIO NATALUCCI 6,60131 Ancona (AN),ITALY
Testing standards IMO MSC.1/Circ.1268
Reference standards Reg II-2/10 of SOLAS 74 as amended, IMO Res.MSC 98(73)-(FSS Code), IMO MSC.1/Circ.1313.
Issued in Genoa on
This Certificate is valid until
March 30, 2022
March 29, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Giovanni Carratino
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED129322CS
Page 1 of 2

Technical characteristics

High pressure water spray system based on automatic activation (sprinkler nozzle and wet pipe) or manual activation (open spray head).
Wet- pipe
Sprinkler Type
EI-FOG 1IXX572.6
Deluge (dry pipe)
Spray Head Type
EI-FOG 2IXX2.615
Wet- pipe and deluge

K factor
2.6

Max distance from bulkhead (m)
1.0

Location
Ceiling

Projection
Pendent

Opeating pressure (bar)
100

Max ceiling height (m)
2.5

Max distance form balcony
partionings (m)
1.5

Max spacing (m)
3.0
Materials/Components
High pressure pump unit, stainless steel piping and fittings, section valves, spray heads or sprinklers, electrical control, monitoring and signaling system as described in the Technical Data Sheets edit by EUSEBI IMPIANTI.
Reference documents
- Fire Fighting Water Mist system - Use and Maintenance Manual n° 7754MG23 edit by Eusebi Impianti and filed by RINA with n° CSST/7725.
- Fire-extingyuishing systems for cabin balconies- Technical data sheet edit by Eusebi Impianti and filed with n° CSST/7726.
- Fire test report n° 2011 NA 1304 edit by TESI Srl and witnessed by RINA.
- Installation detail and system drawing n° 7754MA30 and 7754MA24 filed by RINA with n° CSST/7727 and CSST/7728.
- Head Nozzles Type EI-Fog 1ixx572.6 and Type EI-Fog 2ixx2.615 issued by Eusebi Impianti and approved by Rina with n° CSST/14552.
Fields of application
Automatic/manual water sprinkler system for cabin balconies in according to IMO MSC.1/Circ.1268.





ATTACHMENT TO
CERTIFICATE No. MED129322CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Giovanni Carratino
**** NOTICE: This is NOT an official certificate ****