Single leaf hinged door with maximum clear light of 900x1900 mm (WxH) and having radiused corners with radius of 151 mm. The leaf, having thickness of 89.5 mm and maximum dimensions of 988x1988 mm (WxH), is composed of a steel plate 3 mm thick having the edges bended on the rabbet and of a steel sheet 2 mm thick, fitted in the opposite side. Between the two sheets is fitted the insulating material composed, of one layer of material type PROMAGUARD having thickness of 10 mm and density of 240 kg/m3; a second layer having width of 600 mm is fitted on the previous, in the middle of the leaf, on the lower part until the window and on the upper part between the window and the leaf edge. The insulating material is fixed to the steel sheets having thickness of 2 mm by means of steel pins welded with density of 15 per m2. Inside the leaf are fitted horizontal, vertical, and transversl stiffeners composed of steel tubulars, having dimensions of 40x30 mm and thickness of 2 mm welded to the steel plate having thickness of 3 mm. The leaf may be fitted with a window having maximum clear light of 300x400 mm; the glass, type CONTRAFLAM MARINE A60 (manufacturer Sain Gobain), having thickness of 27 mm, is composed of four glasses and, in between, three thermoexpanding gel layers. The window frame is composed of steel profiles bolted to the leaf with M6 bolts fitted with pitch ranging from 86 up to 88 mm. Between the frame and the glass compound gaskets type Texil, having dimensions of 20x20 mm, are fitted; the glass is sealed by means of silicone type SIKA FIRE. The leaf is equipped with two lever closing devices; one that acts on 2 points on the side opposite to the hinges, is actuated by an handle whereas the other that acts on three points on the hinges side, is actuated by a clevis. The door frame is composed of a carbon steel angular having dimensions of 100x75x7 mm, welded or bolted to the bulkhead by means of M16 bolts (pitch from 152 up to 486 mm), that makes the closure tight with the gasket fitted in the leaf bended edge. The leaf may be fitted, on the upper side, with external door check.
|
ATTACHMENT TO
CERTIFICATE Nr. MED024423CS/001
Page 2 of 3 |
Field of application
Fire resistant A-30 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%. This Class is confirmed also with the door closed only by means of the lever closing device that acts on 2 points on the side opposite to the hinges.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents
Officina Meccanica Mariani drawings No. B-6261-900-27 dated 13 October 2017 approved on 6 February 2018 with endorsement No. LABS-1603.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2017CS013567/1 issued on 6 February 2018 according to IMO 2010 FTP Code Part. 3 and to IMO MSC.1/Circ. 1319 dated 11 June 2009. |