MED246925PUENGBNMay 11, 2029
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo di qualità
Module: B
Certification N. MED246925PU
Certificate date
Type Prevenzione dell'inquinamento marino
Product Oil-filtering equipment (for an oil content of the effluent not exceeding 15 p.p.m.)
Item Nº MED/2.1
Model or Denomin. Hyndai-Detegasa-0.5, 1.0, 2.5, 5.0, 10.0
Applicant HYUNDAI MARINE MACHINERY CO., LTD.
Place of requester 154-63 Gimhae-daero 916beon-gil, Hallim-myeon,  %  50850 Gimhae-Si (Gyeongsangnam-do)  % REPUBLIC OF KOREA
Tel. N.,Fax, Email +82 55 670 9060, +82 55 633 7937, qa@hmmco.co.kr
Directive (EU) 2025/1533
Dati Certificato D o E
Certification N. MED193526PU
Certificate date 28/09/2026
   

Jin Young Kim S


PRODUCTION QUALITY ASSURANCE (MODULE D)
CERTIFICATE No.  MED193526PU

This is to certify that
RINA Services S.p.A. did undertake the relevant assessment procedures for the quality system of the manufacturer identified below, which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2025/1533, for the products described in the EC Type Examination Certificates (Module B) listed in the Attachment to this Certificate.
MED Item Nº MED/2.1
Description Oil-filtering equipment (for an oil content of the effluent not exceeding 15 p.p.m.)
Type Hyndai-Detegasa-0.5, 1.0, 2.5, 5.0, 10.0
Applicant HYUNDAI MARINE MACHINERY CO., LTD.
154-63 Gimhae-daero 916beon-gil, Hallim-myeon,,50850 Gimhae-Si (Gyeongsangnam-do),REPUBLIC OF KOREA
Module B certificate Number  MED246925PU
Date  Jan 28, 2026 
Date   RINA (No. 0474)
    
Issued in RINA Korea Marine on
This Certificate is valid until
September 28, 2026
May 11, 2029

This Certificate consists of this sheet plus an attachment
This certificate, in conjunction with the EC TYPE EXAMINATION (MODULE B) CERTIFICATE of the equipment listed in the Attachment, authorises the Manufacturer or his authorised representative established within the Community to affix the "Mark of Conformity" (wheelmark) as reported below.
0474 /YY
YY Last two digits of year mark affixed

________________________________________
Jin Young Kim
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No. MED193526PU
Equipment:
Hyndai-Detegasa-0.5, 1.0, 2.5, 5.0, 10.0
Technical documentation
This certificate annuls and replaces the certificate No. MED068426PU dated 12-05-2026 due to change of the applicant's address.

____________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) RINA personnel are to be allowed to witness during the performances of activities, upon their request
d) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules
e) RINA may revoke the approval in the case of modifications to requirements or conditions for the approval
f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply.
g) This certificate loses its validity in case the EC type Examination (Module B) certificate is no more valid.
__________________________________
Jin Young Kim

**** NOTICE: This is NOT an official certificate ****