MED369126CS!002ENGD- -  -  N- INSPECTION HATCH WITH HIDDEN FRAME -N- S- S- -12/07/2026- Marine Equipment- - SN- S- - N-  - 1,069,425B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED369126CS/002- N-Jul 11, 20311069425
 
Form
  Marine Equipment(TO)
Certification N. MED369126CS/002 - (ENG)
Certificate date 12/07/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
INSPECTION HATCH WITH HIDDEN FRAME
Applicant DE WAVE S.R.L.
Place of requester VIA DE MARINI 60  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email 01064020886; davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents SOLAS 74 Reg. II-2/9,IMO MSC.1/Circ. 1511/Rev.1
Request 03/06/2026
Expire date 11/07/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED369126CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type INSPECTION HATCH WITH HIDDEN FRAME
Applicant DE WAVE S.R.L.
VIA DE MARINI 60,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards SOLAS 74 Reg. II-2/9; IMO MSC.1/Circ. 1511/Rev.1
Issued in Genoa on
This Certificate is valid until
July 12, 2026
July 11, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED369126CS/002
Page 1 of 2

Product description

Single leaf hinged door with clear light of 750x1870 mm (WxH). The leaf, having dimensions of 790.5x1913.8 mm (WxH) is composed of two steel sheets having thickness of 0,7 mm and, in between, the insulating material composed of a layer of mineral wool, 40 mm thick and having density of 150 kg/m3, glued by means fo 150 gr/m2 of adhesive SikaForce. The door frame is composed of a steel profile, 1,2 mm thick, fixed, by means of self-screwing, to the bulkhead. The door is equipped with a continuous hinge and a closure system type EMKA that acts on three points.
The door may be manufactured also by Wingeco SRL - Via Geirato 135r - 16138 Genova, Italy
Field of application
Fire resistant B-15 Class door with fire hazard on both sides.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- doors without windows
- maximum door size tested
- door used with a fire tested frame design
Reference documents
PRECETTI drawing No. PR142 Rev. 01 dated 6 April 2021 approved on 13 July 2021 with endorsement No. LABS-2257.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2021CS011691/2 dated 13 July 2021 issued according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED369126CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****