MED064126CSENGD- -  -  N- SOMEC FRP W 023 -N- S- S- -28/01/2026- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED064126CS- N-Jan 27, 2031162855
 
Form
  Marine Equipment(TO)
Certification N. MED064126CS - (ENG)
Certificate date 28/01/2026
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
SOMEC FRP W 023
Applicant SOMEC S.P.A.
Place of requester VIA PALÙ 30  %  31020 San Vendemiano (TV)  % ITALY
Tel. N.,Fax, Email 0438471904, 0438471806, info@somecgroup.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents IMO Circ. MSC 1120,IMO Res.MSC.5(48)-(IGC Code) 3,SOLAS 74 Reg. II-2/9
Request 27/01/2026
Expire date 27/01/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED064126CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type SOMEC FRP W 023
Applicant SOMEC S.P.A.
VIA PALÙ 30,31020 San Vendemiano (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards IMO Circ. MSC 1120; IMO Res.MSC.5(48)-(IGC Code) 3; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
January 28, 2026
January 27, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED064126CS
Page 1 of 2

Product description

Window, with central mullion, having maximum overall clear size of 1397x1822 mm (WxH). The maximum clear light of each window is 658.5x1822 mm (WxH) The glass compound is composed of a glass type PYRAN S having thickness of 10 mm with or without deposited metallic oxides (manufacturer Schott), a void space 9 mm deep and a toughened pane having thickness of 10 mm, with or without deposited metallic oxides (manufacturer Somec). The frame is composed of an hollow stainless steel profile, 1.5 mm thick and having dimensions of 60x40x50 mm fixed, by means of threaded inserts having diameter of 8 mm (pitch 500 mm), to a steel profile having thickness of 4 mm and width of 60 mm fillet welded to the bulkhead on the side not exposed to the fire. The central mullion is composed of an hollow stainless steel profile, 1.5 mm thick and having dimensions of 80x40x50 mm; the glass retaining frames, fitted on the exposed side, are composed of steel hollow profiles having thickness of 2 mm and dimensions of 20x15 mm fixed to the frame and to the central mullion by means of threaded inserts having diameter of 5 mm fitted with pitch of 240 mm. Between the glass faces, the frame and the glass retaining frame, gaskets of KERAFIX FLEXLIT, 5 mm thick, are fitted. Between the glass edges and the frame, on the lower side, spacers of calcium silicate having thickness of 5 mm, are fitted. The glass panes are sealed by means of silicone type PENSIL 300.
Field of application
Fire resistant A-0 Class window with fire hazard on the inner side of the application and on the side fitted with the PYRAN S pane.
Reference documents
SOMEC drawing No. CR0223-M01-SD001 dated 7 November 2017 approved on 8 November 2017 with endorsement No. LABS-1559.
Tests carried out
Tests as per RINA Test Laboratory report No. 2017CS013508 issued on 8 November 2017 according to IMO 2010 FTP Code Part. 3 - Appendix 2 - A.I.




ATTACHMENT TO
CERTIFICATE No. MED064126CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****