MED213323CS!004ENGBN
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo di qualità
Module: B
Certification N. MED213323CS/004
Certificate date 11/8/23
Type Protezione antincendio
Product Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Item Nº MED/3.18a
USCG Category N° 164.112
Model or Denomin. UTECHGTA
Applicant TEKNOWOOL SUD S.R.L.
Place of requester VIA FERRANTE IMPARATO 109  %  80146 Napoli (NA)  % ITALY
Tel. N.,Fax, Email 081 5593222, 081 7528284, infosud@teknowool.com
Directive (EU) 2023/1667
Dati Certificato D o E
Certification N. MED009524NA/004
Certificate date 30/04/2024
   

Francesco Citarella S


PRODUCTION QUALITY ASSURANCE (MODULE D)
CERTIFICATE No.  MED009524NA/004

This is to certify
that RINA Services S.p.A. did undertake the relevant quality assessment procedures for the equipment of the manufacturer identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of (EU) 2023/1667 and according to the type described in the EC Type Examination Certificate (Module B) below indicated.
MED Item Nº MED/3.18a
USCG Category Nº 164.112
Description Surface materials and floor coverings with low flame-spread characteristics: (a) decorative veneers
Type UTECHGTA
Applicant TEKNOWOOL SUD S.R.L.
VIA FERRANTE IMPARATO 109,80146 Napoli (NA),ITALY
Module B certificate Number  MED213323CS/004
Date  08/11/2023 
Date   RINA (No. 0474)
    
Issued in RINA Naples Marine on
This Certificate is valid until
April 30, 2024
April 29, 2027

This Certificate consists of this sheet plus an attachment
This certificate authorises the Manufacturer or his authorised representative established within the Community in conjunction with the EC TYPE EXAMINATION (MODULE B) CERTIFICATE to affix the following symbol on the equipment above identified.
0474 /YY
YY Last two digits of year mark affixed
USCG Approval marking
The manufacturer is allowed to affix the U.S. Coast Guard approval number (USCG approval number:
164.112/EC0474/MED009524NA/004 to the above equipment, as allowed by the 'Agreement between the European Community and the United States of America on Mutual Recognition of Certificates of Conformity for Marine Equipment' signed February 27th, 2004.

________________________________________
Francesco Citarella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No. MED009524NA/004
Equipment:
UTECHGTA
Technical documentation

____________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) RINA personnel are to be allowed to witness during the performances of activities, upon their request
d) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules
e) RINA may revoke the approval in the case of modifications to requirements or conditions for the approval
f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply.
g) This certificate loses its validity in case the EC type Examination (Module B) certificate is no more valid.
__________________________________
Francesco Citarella

**** NOTICE: This is NOT an official certificate ****